wiki:Hardware/hNodes/cNodeVer3/aMain/cLV67J

Version 13 (modified by msherman, 11 years ago) ( diff )

—

LV-67J

Table of Contents

  1. Hardware
    1. Nodes
      1. ORBIT Node (Version 1)
        1. Orbit case 1
      1. ORBIT Node (Version 2)
        1. Orbit case 2
      1. ORBIT Node (version 3)
        1. Main Generation 3 Nodes
          1. LV-67C
          1. LV-67G
          1. LV-67J
        1. Mobile Generation 3 Nodes
          1. LV-67B
          1. LV-67F
          1. LV-67K
        1. Orbit case 3 (COTS)
        1. Assembly
          1. Case Assembly
          1. Mother Board BIOS Settings
      1. ORBIT Node (version 4)
        1. Main Generation 4 Nodes
        2. High Performance Generation 4 Nodes
        3. Large Core Count Generation 4 (SDR) Nodes
        1. Orbit case 4 (COTS)
        1. Assembly
          1. Case Assembly
        1. Debugging notes
      1. ORBIT Mobile Node (version 1)
        1. Hardware
          1. NUC
          2. SDR Front End
        2. Standard 4x4 Case Extension
          1. Battery Operation
          2. Assembly instructions

LV67J

STUB

For use as console: Making Switch:

  1. Take switch from bin
  2. Cut 4 wires, 24awg, 2 black, 1 blue, 1 red
  3. Strip ends of wires, short on 1 side, about 1cm on other
  4. crimp short molex pins onto ends
  5. solder other ends to switch.
    1. Blue to terminal by mark (led positive)
    2. Black opposite it.
    3. Other two terminals get red and black, orientation doesn't matter. (switch)
  6. cut heat shrink to length, slide over wires down to terminal
  7. shrink
  8. twist wire pairs to keep separate
  9. plug pins into molex terminals.
    1. red/black to 2 pin
    2. blue/black to ends of 3 pin
BIOS Settings (bios version 1.1J):
  • Main
    • Boot Features (get right name)
      1. Quick Boot (ON)
      2. Console Redirection (ON)
        • Terminal Type (ANSI)
      3. UEFI Boot (OFF)
  • Advanced
    1. Processor Configuration
      1. Intel ® HT Technology (ON)
      2. Intel ® Virtualization Technology (ON) (Default)
    2. System Agent Configuration
      1. Intel VT for directed IO (ON)
    3. Network Configuration
      1. LAN OPROM Selection (ON)
      2. Wake on PCH LAN (OFF)
    4. AMT Configuration (Maybe needed, built in serial over lan?)
      1. Disable
    5. ME configuration
      1. Disable
  • Other
    1. SIO config
      1. Paraller port (disabled)
    2. Hardware Monitor
      1. CPU warning temp (90C)
      2. Fan control (by temperature)
      3. Fan control threshold (40c)
  • Boot Order
    1. Usb Hdd
    2. If Network card
      1. 0100
    3. If no network card
      1. 00C8
    4. Hdd0
Flashing BIOS

backup first

from readme: Flash Method:

  1. Please make a boot-able Disk which could booting into DOS environment.
  2. Un-zip attached files and copy it into boot-able Disk.
  3. Power on the system and flash the BIOS under the DOS environment.
    1. First, Backup the current BIOS FPT -D nodeXX-XX-bak.bin
    2. The instruction will be "C:/fpt -savemac -f 67J12.BIN"
  4. Please turn off the system and clean CMOS by Jumper.
  5. Turn on the system and update BIOS successful.

Attachments (1)

  • LV-67J.jpg​ (78.8 KB ) - added by Ilya Chigirev 11 years ago.

Download all attachments as: .zip

Note: See TracWiki for help on using the wiki.