BSFB – Datapath API (Internal) ¶

These API describes the functionality exported by the modified NEC basestation controller, which will be used by the Datapath controller module.

Network Entry Control API Specification ¶

This API is called by the datapath manager after it receives appropriate notification from the RM-Datapath API

appendMACAcl ¶

Add the given MAC address to the ACL (access control list) at the BTS

appendMACAcl (MS_MAC_Addr, IPaddress/mask)
   IP address for the corresponding MAC address is specified along with the mask.
   Done before a connection / flow can be setup.

removeMACAcl ¶

Remove the given MAC address from the ACL of the BTS

removeMACAcl( MS_MAC_Addr, IPaddress/mask)
-	IP address for the corresponding MAC address is specified along with the mask.
-	Done before a connection / flow can be setup.

acceptMAC ¶

acceptMAC(MS_MAC_Addr)

rejectMAC ¶

rejectMAC(MS_MAC_Addr)

clientRegistration ¶

clientRegistration(MS_MAC_Addr)

clientDeregistration ¶

clientDeregistration(MS_MAC_Addr)

Radio Level Monitoring ¶

getAvailableResources ¶

Returns the Available DL and UL resources in the BS currently.

getAvailableResources()

getMCS ¶

Returns the current Modulation and coding scheme for the given MAC address.

getMCS(MSID)

getThroughput ¶

Returns the current MAC throughput (Mbps) for the given MAC addess.

getThroughput(MSID) 

getPacketLoss ¶

Returns the current packet loss rate and retries for the given service flow.

getPacketLoss(MSID)