wiki:Hardware/jCM/cCM2/cSoftware

Version 3 (modified by seskar, 17 years ago) ( diff )

—

Software Description

Development Environment

JTAG Programmer Hardware

We are using Olimex ​ARM-USB-OCD USB based JTAG debugger that is attached to the JTAG port on the CM2 board (JXX).

JTAG Programmer Software

Software used for debugging and internal flash programming is ​OpenOCD (standard Debian package - apt-get isntall openocd ).

Cross-compiler

Software development environment is based on ​GNU Toolchain for ARM Processor. Downloaded tarball is installed in /usr/{bin,lib,libexec,arm-none-linux-gnueabi}. The toolcahin was compiled with the arm-none-linux-gnueabi prefix so that (for example) compiler can be invoked with: 

  arm-none-linux-gnueabi-gcc program.c -o program

STR71X Library

The ST's firmware library is used for peripheral management.

TCP/IP Library

We are using ​uIP TCP/IP stack developed by Adam Dunkels.

Attachments (3)

  • uip-1.0-refman.pdf​ (1.3 MB ) - added by seskar 17 years ago. uIP Reference Manual
  • 10780.pdf​ (2.8 MB ) - added by seskar 17 years ago. STR71x Firmware Library Usre Manual
  • FlashProgramming.pdf​ (451.2 KB ) - added by seskar 16 years ago. STR7 Family Flash Programming User Manual
Note: See TracWiki for help on using the wiki.