Software Description ¶

Development Environment ¶

JTAG Programmer Hardware ¶

We are using Olimex ​ARM-USB-OCD USB based JTAG debugger that is attached to the JTAG port on the CM2 board (JXX).

JTAG Programmer Software ¶

Software used for debugging and internal flash programming is ​OpenOCD (standard Debian package - apt-get isntall openocd ).

Cross-compiler ¶

Software development environment is based on ​GNU Toolchain for ARM Processor. Downloaded tarball is installed in /usr/{bin,lib,libexec,arm-none-linux-gnueabi}. The toolcahin was compiled with the arm-none-linux-gnueabi prefix so that (for example) compiler can be invoked with:

  arm-none-linux-gnueabi-gcc program.c -o program

STR71X Library ¶

TCP/IP Library ¶

We are using ​uIP TCP/IP stack developed by Adam Dunkels.