Version 26 (modified by 18 months ago) ( diff ) | ,
---|
Table of Contents
Tutorial: OpenStack Setup
In this tutorial, we will be using one of the sb9 nodes for setting up OpenStack. Make sure you have Ubuntu 20.04.5 LTS. To get the Ubuntu Version, follow these steps on the sb9 console. The below steps illustrate for node1-2 of sb9. On your sb9 console,
omf tell -t node1-2 -a offh
omf load -t node1-2 -i baseline20.04.ndz
omf tell -t node1-2 -a on
To verify if you have loaded Ubuntu 20.04 properly, use this command after ssh into the node1-2
lsb_release -a
This will list the current version of Ubuntu loaded.
Set up an OpenStack development environment via DevStack
After loading the Ubuntu 20.04 image is complete, you can follow below steps to install OpenStack
- Update and Upgrade Packages:
sudo apt-get update && sudo apt-get upgrade
- Install Git:
sudo apt-get install git
- Clone the DevStack Repository:
git clone https://github.com/openstack/devstack.git
- Create a Stack User:
sudo ./devstack/tools/create-stack-user.sh
- Switch to the Stack User:
sudo su stack
cd ~
- Clone the DevStack Repository (as the Stack User):
git clone https://git.openstack.org/openstack-dev/devstack
- Remove the Existing Python 3 Pip Package (if present) and Download and Install the Latest Python 3 Pip Package:
sudo apt remove python3-pip
wget https://bootstrap.pypa.io/get-pip.py
sudo python3 get-pip.py
- Install a Specific Version of the Cryptography Package(there is version conflict with the OpenSSL package automatic installed by dev stack so better install the this below version) :
pip install cryptography==38.0.4
- Configure and setup local.conf in dev stack folder according to requirement (either the controller or compute node):
cd devstack/samples
cp local.conf ../
cd ../
after copying local.conf to the devstack folder, uncomment and change the HOST_IP to the IP of the current node(so here in this case 10.19.1.2) and
- Fireup the Stack:
FORCE=yes ./stack.sh
For more: https://docs.openstack.org/watcher/newton/dev/devstack.html
This will take around 15-20 minutes. In this process, you might be asked to set up passwords for Horizon, MYSQL, etc. Once installation is done, it provides information related to Horizon, Keystone.
This is your host IP address: 10.19.1.2
This is your host IPv6 address: ::1
Horizon is now available at http://10.19.1.2/dashboard
Keystone is serving at http://10.19.1.2/identity/
The default users are: admin and demo The password: *(Password set by you during installation process)
You can login to view the Horizon dashboard(http://10.19.1.2/dashboard) using below default credentials
Attachments (6)
- lsb_release.jpg (19.6 KB ) - added by 17 months ago.
- hostname-I.jpg (10.5 KB ) - added by 17 months ago.
- ipaddress.jpg (67.9 KB ) - added by 17 months ago.
- badpassword.jpg (91.4 KB ) - added by 17 months ago.
- goodies.jpg (72.2 KB ) - added by 17 months ago.
- runcommand.jpg (72.1 KB ) - added by 17 months ago.
Download all attachments as: .zip