| Version 1 (modified by , 12 years ago) ( diff ) |
|---|
Spectrum sensing with USRP2
Description
In this tutorial we'll use the USRPs on the grid for FFT-based spectrum sensing. Each USRP (centered on a frequency with specified bandwidth) will collect data into an OML server for post processing. For details on available USRP2s on the grid, please see available USRP2 HW.
Hardware / Software Resources utilized
- Grid nodes with a USRP2 connect via Ethernet.
- ubuntu-11-10-gnuradio.ndz: disk image loaded onto nodes. This image has all the precompiled - software required to configure the USRPs and analyze recorded data. The USRP2's interface with the node is already configured.
- omf-5.3: used to image to nodes
Attachments (11)
- spectrum_measurement_node8-8 (24.6 MB ) - added by 12 years ago.
- noise_floor.png (715.4 KB ) - added by 12 years ago.
- f5.002.png (659.3 KB ) - added by 12 years ago.
- spectrum_console.cpp (5.4 KB ) - added by 12 years ago.
- CWriteOML_spectrum.h (5.2 KB ) - added by 12 years ago.
- spectrum.cpp (9.9 KB ) - added by 12 years ago.
- s1.png (44.8 KB ) - added by 10 years ago.
- s2.png (44.9 KB ) - added by 10 years ago.
- signal.png (204.0 KB ) - added by 10 years ago.
- fReconFDSignal.m (240 bytes ) - added by 9 years ago.
- readWiserdFile.m (675 bytes ) - added by 9 years ago.
Note:
See TracWiki
for help on using the wiki.
