WiMAX Tutorial 2: OMF based WiMAX experiments

This is a continuation of the WiMAX Tutorial and Primer.

Prerequisites

This tutorial series assumes you have an ​ORBIT account, have ​scheduled a session on the ORBIT test bed, are familiar with ​SSH'ing ​into the test bed itself, and are familiar with the basics of running ORBIT experiments. If you have not done these things yet, you may wish to do so before taking a look at this slightly more advanced experiment. If you are unfamiliar with or are entirely new to ORBIT, you may wish to start ​here.

Difficulty

This tutorial is of intermediate difficulty. In addition to the knowledge from the previous tutorial, basic understanding of the ​ORBIT Experiment Description Language (OEDL) and its source language, ​Ruby (and especially ​blocks within Ruby), are strongly recommended. Furthermore, fluency in low-level computer networking concepts such as IP are assumed.

---

About This Experiment

This tutorial section is adapted from the tutorials at ​NYU Poly WITest lab and expanded from the more concise ​ORBIT adaptations done previously. As before, we will perform our experiment on Sandbox 4, providing some background information at each step. For more information, see the relevant documentation for each step at one of the source websites. This experiment uses OMF Version 5.3, also known as omf-5.3. This experiment very well may fail for other versions of OMF.

---

Experiment: Check Connection Status, Then Send UDP Packets

---

The Code

The following are the links to experiment Description script and the underlying codes. In the interest of saving space, they are not posted directly to this page.

• ​Experiment Description
  
• ​iperf app
  
• ​wimaxcu_app wrapper
  
• ​wmxstat program
  

At this point, we will give a primer on OMF and some of the functions inside the experiment. To skip to the experiment itself, ​click here.

---

Background Information

Experiments performed on ORBIT (specifically) and all GENI wireless test-beds are managed by what was once called the ORBIT Management Framework, now simply known as ​OMF. (For background information on frameworks, see ​Wikipedia.) Simply put, a framework provides programs which perform all the generic functions a programmer would otherwise need to code at a given layer to obtain functional applications. This includes programs that check various paths, run subprograms, collect data, check validity, sanitize inputs, and more. Together with its sister program, formerly known as the ORBIT Measurement Library (now known as OML), OMF is used to run experiments from start to finish.

But how is an experiment defined? At ORBIT, the aforementioned OEDL is used to mark up a script describing an experiment. Instead of having to manually define every subject and action, though, the framework (OMF) "knows" how to generically do most tasks. The experimenter simply uses OEDL functions and syntax to delineate a specific experiment. The script is then loaded onto a testbed and executed using OMF.

---

Dissecting the Experiment

defProperty('firstMCS',"http://wimaxrf:5052/wimaxrf/dlprofile?dlprof1=13","Set MCS to profile 13 - QPSK (CTC) 1/2 ")
defProperty('secondMCS',"http://wimaxrf:5052/wimaxrf/dlprofile?dlprof1=16","Set MCS to profile 16 - 16-QAM (CTC) 1/2")
defProperty('thirdMCS',"http://wimaxrf:5052/wimaxrf/dlprofile?dlprof1=21","Set MCS to profile 21 - 64-QAM (CTC) 5/6")
defProperty('noMCS',"http://wimaxrf:5052/wimaxrf/dlprofiledlprof2=255&dlprof3=255dlprof4=255&dlprof5=255&dlprof6=255&
            dlprof7=255&dlprof8=255&dlprof9=255&dlprof10=255&dlprof11=255&dlprof12=255","Set other MCS to none")

defProperty is a method which appears in different scopes within OMF. In this global case, it creates methods of the property with the name of the first input (as a string), stores and releases the value of the second input, and takes the third input as a description.

• As shown in the previous experiment, this URI accesses the base station and assigns it certain values.

defGroup('first_node', 'node1-1.sb4.orbit-lab.org')

defGroup is a method which creates groups of resources (usually nodes), gives them a URI for later identification (first parameter), and identifies these resources by the second parameter (in OMF version 5.3, they are identified as above). The (optional) third parameter is a block argument.

• We do not pass a block as an explicit parameter here, because it follows the method.

defGroup('first_node', 'node1-1.sb4.orbit-lab.org') do |node|
  node.net.x0.profile = '51'
  node.net.x0.ip = '10.41.14.1'
  node.net.x0.netmask = '255.255.0.0'
  node.net.x0.up
  node.addApplication("test:app:wimaxcu_app") do |app|
    app.measure('status_link')
  end
  ...
end

• As those familiar with Ruby will note, this method receives additional instructions from a block. Here, node is a dummy variable referring to the group itself, although the exact behavior of Ruby blocks is outside the scope (pun intended) of this discussion.

• Here, net.x0.profile configures the WiMAX network profile default as 51. The node will prefer this network when searching for available connections. This is the same as the command "wimaxcu connect network 51".

• net.x0.ip, net.x0.netmask, and net.x0.up all perform the eponymous ifconfig operations.

addApplication gives a group instructions to use the defined application in the specified manner. The principle parameter is the URI of the predefined application.

• The wimaxcu_app application is actually already installed in the experiment image here, and "test:app:…" instructs OMF to search in the /test/app/ subdirectory of its primary directory of applications.

• app.measure('status_link') tells this application to use its predefined code to measure the 'status_link' property. OML will save these data for later. The exact behavior of this application is outside the scope of this discussion; suffice it to say that the implementation of the application is defined in the wimaxcu_app.rb and wmxstat programs mentioned previously.

  node.addApplication("test:app:iperf") do |app|
    app.setProperty('udp', true)
    app.setProperty('server', true)
    app.setProperty('interval', "1")
    app.setProperty('bind', "10.41.255.255")
    app.measure('UDP_Rich_Info', :samples =>1)
  end

• As before, this application is contained in a subdirectory accessed through /test/app/.

This adds the iperf application functionality to the group. iperf is an application which measures connectivity by sending data packets between groups.

setProperty is fairly self-explanatory. It simply configures individual parameters germane to the operation of iperf.

Here, app.measure is interesting because it is only one of the possible measurements that can be taken by the iperf app. For the others, see the iperf.rb code.

---

Launch Experiment

Before launching the experiment, please ensure that the experiment description file is on the local machine.

Image the nodes, as before.

omf-5.3 load -i wmx-tutorial.ndz -t node1-1.sb4.orbit-lab.org,node1-4.sb4.orbit-lab.org

Optionally, double check that the image loaded correctly.

Now, launch the experiment!

omf-5.3 exec nyupoly_mcsmod.rb

---

Troubleshooting Runtime Problems

There are a few problems which may arise during the course of attempting to run this experiment. Usually, they are the result of fragmentation of framework/operational code. Below are some errors encountered, and suggested solutions.

• The node handler gives an error stating that the experiment expected an integer/string and that it was given a string/integer. This arises due to different versions of the source iperf.rb application wrapper. Simply edit the Experiment Description to the alternate data type and try again.

• The node handler gives an error stating the network profile failed to configure, but then the raised error describes an ongoing connection status — this is most likely a false alarm caused by running an experiment over a predefined configuration. The node reconfigures, but believes that the configuration status is an error message.

---

Retrieving Results

Data is collected during experimentation and pushed to a server using an experiment ID indicated during the initiation and conclusion of each experiment. This ID is important, as it is used to recover experiment results and even view them in real-time. (Server names vary with test beds. This server name is specific to ORBIT.)

To recover experiment data to the local machine, and using the experiment ID:

wget "http://oml:5053/result/dumpDatabase?expID=<your_experiment_ID>" -O myDatabase

• If the experiment ID contains non-alphanumeric ASCII characters, it is necessary to escape each of them using "%" followed by the ASCII code.

You're almost done. In order to get SQLite to recognize the database, it first must be told that the information is a database.

sqlite3 -init myDatabase myDatabase.sq3