wiki:Internal/Nodes/NodeTesting

Version 2 (modified by ssugrim, 12 years ago) ( diff )

A brief Guide to Node Testing

The procedure is different for different generations of nodes. We'll break it up into two classes:

Old rabbit Based CM

  1. First locate the node4-11 Node ID box, it looks like
    Node ID box
  2. Wire the control, CM, monitor, and keyboard to their respective ports
  3. Connect Power, the led on the top of the box should start flashing
  4. Connect via ssh to console.outdoor.orbit-lab.org
  5. Run
    ssugrim@console.outdoor:~$ omf-5.2 stat
     INFO NodeHandler: init OMF Experiment Controller 5.2.408
    -----------------------------------------------
     INFO Topology: Loading topology 'system:topo:all'.
     Testbed : outdoor.orbit-lab.org
     .
     .
     .
     Node n_4_10 - State: NODE NOT AVAILABLE
     Node n_4_11 - State: POWEROFF
     Node n_4_12 - State: NODE NOT AVAILABLE
    -----------------------------------------------
    
    Note the status of node 4-11. 1.Check the serial console by telneting to cons4-11 8023

New Lantronix Based CM

Attachments (2)

Note: See TracWiki for help on using the wiki.