Changes between Version 26 and Version 27 of Internal/AtherosDriverLimits

Timestamp:

Sep 15, 2006, 11:23:07 AM (18 years ago)

Author:

Gautam D. Bhanage

Comment:

—

Internal/AtherosDriverLimits

@@ -145 +145 @@
  * Instantiate nodeagent by doing ssh in a client and executing /usr/sbin/nodeagent
  * The new nodeagent code is now running on the client.
- *  
+ * Run the nodehandler on the console with our mini test script by: gautam@console.grid:~$ nodehandler -k atheros-1-node
+- remember do not give the '.rb' extension, as this is some how appended by the script itself.
+ * All the status messages can be seen on the screen running the new nodeagent at command line and all the requests made are seen as a part of the INFO statements placed in the code for debugging (sample code running on node9-4):
+  {{{
+ INFO NodeAgent: Located at 9:4
+ INFO NodeAgent: RESET
+ INFO WirelessDevice.unload: 
+ INFO NodeAgent: Located at 9:4
+ INFO AtherosDevice: configure net/w0/mode = master
+ INFO AtherosDevice: activate: ath0 ath_pci false
+ INFO AtherosDevice: activate: ath0 ath_pci destroy previous instance of ath0
+ INFO AtherosDevice: activate: ath0 ath_pci destroy previous instance of ath1
+ INFO AtherosDevice: Loaded ath_pci driver
+ INFO AtherosDevice: getConfigCmd: master
+ INFO AtherosDevice: configure net/w0/essid = neo
+ INFO AtherosDevice: configure net/w0/channel = 36
+ INFO AtherosDevice: configure net/w0/ip = 192.168.1.1
+ INFO AtherosDevice: configure net/w0/mode = master
+ INFO AtherosDevice: getConfigCmd: master
+ INFO AtherosDevice: configure net/w1/essid = trinity
+ INFO AtherosDevice: configure net/w1/ip = 192.168.2.1
+ INFO AtherosDevice: New Cell ID: 00:60:B3:AC:2B:52
+ INFO AtherosDevice: New Cell ID: 06:60:B3:AC:2B:52
+ INFO NodeAgent: RESET
+ INFO WirelessDevice.unload: 
+ INFO WirelessDevice: Unloaded ath_pci driver
+ INFO NodeAgent: Located at 9:4
+  }}}
+ * To check if the nodeagent worked properly ssh into the node, and do a iwconfig when the script is done configuring the interfaces. Detailed information with the essid's and mapped ip addresses will be seen on screen.
+ * The drivers are unloaded at the end of the experiment and this can be checked by doing a iwconfig at the end of the experiment.
+