Changes between Version 9 and Version 10 of Hardware/lDirAnt

Timestamp:

Sep 28, 2016, 1:45:30 PM (8 years ago)

Author:

seskar

Comment:

—

Hardware/lDirAnt

@@ -11 +11 @@
  || [[Image(Ant1.png, width=400, caption="Figure 1")]] || [[Image(NodeWiFi.png, width=400)]] ||
 
-These antennas have [[attachment:Ant1.pdf typical donut-shaped shape radiation pattern]] with an average 2 (@ 2.4 GHz) and 4 (@ 5GHz) dBi of gain.  
+These antennas have [attachment:Ant1.pdf typical donut-shaped shape radiation pattern] with an average 2 (@ 2.4 GHz) and 4 (@ 5GHz) dBi of gain.  
 
 === Multi-standard Antennas ===
 
-Number of SDR units in the grid have [[attachment:Ant2.pdf multi-band (i.e. multi-standard) antennas]] covering most of the WiFi and 4G bands. They are mounted on the square plate about 12 inches apart (in horizontal plane) as shown in Figure 4.
+Number of SDR units in the grid have [attachment:Ant2.pdf multi-band (i.e. multi-standard) antennas] covering most of the !WiFi and 4G bands. They are mounted on the square plate about 12 inches apart (in horizontal plane) as shown in Figure 4.
  
  || [[Image(Ant2.png, width=400)]] || [[Image(MountingPlate.png, width=400)]] ||
@@ -23 +23 @@
 4 nodes with USRP X310 devices in addition to standard antennas (WiFI for two internal devices and multi-standard paddle antennas) are equipped with a electronically steerable antenna and a block of RF switches facilitating antenna selection.
 
-The 2.4-2.5 GHz [[http://www.fidelity-comtech.com/wp-content/uploads/SpecSheet_FCI-3740.pdf Fidelity Comtech FCI-3740 Phased Array]] device actually comprises of: 
+The 2.4-2.5 GHz [http://www.fidelity-comtech.com/wp-content/uploads/SpecSheet_FCI-3740.pdf Fidelity Comtech FCI-3740 Phased Array] device actually comprises of: 
  * Directional antenna with 14.5 dBi of gain and 127 electronically selectable antenna patterns 
  * Omni-directional 9 dBi antenna