wiki:Hardware/jCM/dCM3/dUsage

Version 11 (modified by Ilya Chigirev, 13 years ago) ( diff )

—

Table of Contents

    Usage

    Installing the CM3

    For installation instructions please see the node assembly wiki page, found ​here

    UDP

    The software loaded onto the CM3 provides

    HTTP Commands

    All HTTP commands are can be executed by typing the IP of the device with the following command afterward

    /HardOff Turns device off if not already off, command to simulate button press
    /SoftOff Shuts down device by software, non-functional right now, same as HardOff command
    /Reset Issues signal to reset pins on motherboard of host
    /PowerOn Turns device on if not already on

    Physical Interface

    Attachments (1)

    • manualIP.png​ (118.4 KB ) - added by Ilya Chigirev 11 years ago. Manually Entering an IP

    Download all attachments as: .zip

    Note: See TracWiki for help on using the wiki.