Changes between Version 11 and Version 12 of Hardware/jCM/dCM3/dUsage


Ignore:
Timestamp:
Jun 14, 2011, 7:55:53 PM (13 years ago)
Author:
Ilya Chigirev
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/jCM/dCM3/dUsage

    v11 v12  
    11[[TOC(Hardware/CM/*, depth=2)]]
    22
    3 == Usage ==
    4 === Installing the CM3 ===
     3== Installing the CM3 ==
    54For installation instructions please see the node assembly wiki page, found [http://www.orbit-lab.org/wiki/Internal/Lv67cNode here]
    65
    7 === UDP ===
    8 The software loaded onto the CM3 provides
    9 
    10 === HTTP Commands ===
    11 All HTTP commands are can be executed by typing the IP of the device with the following command afterward
    12 || `/HardOff` || Turns device off if not already off, command to simulate button press ||
    13 || `/SoftOff` || Shuts down device by software, non-functional right now, same as !HardOff command ||
    14 || `/Reset` || Issues signal to reset pins on motherboard of host ||
    15 || `/PowerOn` || Turns device on if not already on ||
    16 
    17 === Physical Interface ===
     6== Using the CM3 ==