| 52 | | 2. a |
| 53 | | 3. a |
| 54 | | 4. a |
| | 52 | 2. Faceplate |
| | 53 | 1. Remove square SPIDF cover from faceplate |
| | 54 | 2. Clip Faceplate into case |
| | 55 | 3. Bend up tabs over usb slots |
| | 56 | 3. Motherboard |
| | 57 | 1. Place into case |
| | 58 | 2. Slide into faceplate |
| | 59 | 3. Align screw holes |
| | 60 | 4. Gently screw in (4) 6-32 1/2" pan head screws |
| | 61 | 5. Alternate corners while gently tightening. |
| | 62 | 4. SSD |
| | 63 | 1. By hand, screw (4) M3 5mm stand offs into bottom of ssd |
| | 64 | 2. Orient SSD with screw holes, ports facing center of case |
| | 65 | 3. Attach ssd to case with (4) M3 5mm screws, alternating corners |
| | 66 | 5. PSU |
| | 67 | 1. Place PSU |
| | 68 | 2. Screw in (1) 6-32 1/4" pan head screw in top hole |
| | 69 | 3. Screw in (2) 6-32 1/4" 100 degree screws |
| | 70 | 4. If desktop node (not mobile) attach 4 pin mobo power |
| | 71 | 5. |
| | 72 | |
