Changes between Version 2 and Version 3 of Hardware/bDomains/cSandboxes/iSB9


Ignore:
Timestamp:
Dec 21, 2011, 6:20:55 PM (13 years ago)
Author:
Ilya Chigirev
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Hardware/bDomains/cSandboxes/iSB9

    v2 v3  
    1111The first 7 hosts (node1-1..node1-7) each contain a 4x1GbE NetFPGA installed on a PCI slot. Each NetFPGA has 4 connections to the top switch, corresponding to its 4-GbE ports nf2c0-nf2c3.
    1212
    13 The Pronto switch is a !OpenFlow enabled switch and can be run in native or !OpenFlow mode by controlling its boot configuration. When in native mode, it runs the Pica8 Xorplus switch software while when it is in !OpenFlow mode it can run either stock Indigo firmware or experimenter provided !OpenFlow image for Pronto switches. The mode of operation is controlled by the [wiki:Software/AM/Network network aggregate manager] service.
     13The Pronto switch is a !OpenFlow enabled switch and can be run in native or !OpenFlow mode by controlling its boot configuration. When in native mode, it runs the Pica8 Xorplus switch software while when it is in !OpenFlow mode it can run either stock Indigo firmware or experimenter provided !OpenFlow image for Pronto switches. The mode of operation is controlled by the [wiki:Software/AM/Network network aggregate manager] service. [[BR]]
    1414
    15 [[Image(SB9_pic.JPG, 500px, align=center)]]
     15[[Image(SB9_pic.JPG, 500px)]]