Back

Centralized Arbitrary Noise Injection Subsystem

This subsystem consists of a central arbitrary waveform generator (Agilent ESG) connected to four distribution antennas through a RF switch. Using this subsystem, users can inject individually controllable (power/frequency) noise into the ORBIT grid.

Webservice commands

<serviceGroup name="interference">
  <info>Interference injection control service</info>
  <service name="awgn">
     <info>Configures interference injection singal type to AWGN</info>
     <args>
        <arg name="bandwidth" value="noise BW in MHz"/></args>
  </service>
  
  <service name="initialize">
     <info> Resets interference injection subsystem to default state </info>
  </service>

  <service name="set">
     <info>Set global interference injection parameters</info>
     <args><arg name="power" value="noise BW in MHz"/>
           <arg name="channel" value="802.11 channel number"/>
           <arg name="frequency" value="interference center frequency"/>
           <arg name="antenna-atten-1" value="attenuation in db"/>
           <arg name="antenna-atten-2" value="attenuation in db"/>
           <arg name="antenna-atten-3" value="attenuation in db"/>
           <arg name="antenna-atten-4" value="attenuation in db"/>
     </args>
  </service>
  
  <service name="start">
       <info>Turn on interference injection</info>
  </service>
  
  <service name="status">
	<info>Show current status of the interference injection subsystem</info>
  </service>
  
  <service name="stop">
        <info>Turn off interference injection</info>
  </service>
  
  <service name="wave">
	<info>Configures interference injection singal type to one of the pre-recorded signals</info>
	<args>
             <arg name="waveform" value="waveform name"/>
        </args>
  </service>
</serviceGroup>

Example

To set AWGN on channel 36 at -30 dBm on antenna1 use