USRP2 - Front end calibration data

Description

Characteristics of USRP's front end were measured against an RF reference:

1. Agilent ESG Vector Signal Generator (E4438C) for the USRP2's receiver
   USRP2 receiver measures the frequency and power level of known signals sent from signal generator.
2. Agilent ESA-E Series Spectrum Analyzer (E4405) for USRP's transmitter
   USRP2 transmitter sends specified signal with frequency and amplitude level that is measured by spectrum analyzer.

Set Up

Procedures

Data & Plots for receiver

The data file for plots are also available in the attachments. A brief description of the columns:

1. sgfrequency_in - signal generator frequency (Hz)
2. sgpower_in - signal generator power (dBm)
3. gain_in - usrp receive path gain (dBm)
4. rxfrequency_meas - usrp measured frequency (Hz)
5. rxpeakpower_meas - usrp measure power (dBm)

Node13-8 Receiver — ​data
Node20-20 Receiver — ​data
Node16-16 Receiver — ​data
Node16-5 Receiver — ​data
Node8-13 Receiver — ​data
Node5-16 Receiver — ​data

Data & Plots for transmitter

The data file for plots are also available in the attachments. A brief description of the columns:

1. frequency_in - usrp generated carrier frequency (Hz)
2. amplitude_in - usrp specified amplitude (dBm)
3. gain_in - usrp transmit path gain (dBm)
4. frequency_meas - spectrum analyzer measured frequency (Hz)
5. peakpower_meas - spectrum analyzer measure power (dBm)

Node13-8 Transmitter — ​data
Node20-20 Transmitter — ​data