Changes between Version 6 and Version 7 of Tutorials/qNSE/aNgSgEmulator

Timestamp:

Nov 4, 2018, 12:12:11 PM (6 years ago)

Author:

mita

Comment:

Updated links to the source code.

Tutorials/qNSE/aNgSgEmulator

@@ -1 +1 @@
 == Emulator for Next-Generation Smart Grid Network Management Tutorial ==
 
-This wiki page contains tutorial for: "Emulator for Next-Generation Smart Grid Network Management".
+This wiki page contains tutorial for: "Software Defined Network Management for Dynamic Smart Grid Traffic".
 
 === Description ===
 For this tutorial we will use ORBIT SB9 test bed to execute a test with two types of supported flows (stream and command flows) on test topology shown on image below.
+
+Source code for SDN Control Framework and Smart Grid Communication Evaluation Platform is available [http://www.orbit-lab.org/attachment/wiki/Tutorials/qNSE/aNgSgEmulator/sg-sdn.zip here].
 
 [[Image(tutorial_topo.png)]]
@@ -19 +21 @@
 3. [https://github.com/jsonpickle/jsonpickle jsonpickle], used for JSON configuration deserialization. Installed using pip: `pip install jsonpickle`.
 4. [https://github.com/phaag/nfdump nfdump], needed for Net Flow results parsing. It can be installed using: `sudo apt-get install nfdump`.
-5. emulator, provided at following link
+5. emulator, provided at following [http://www.orbit-lab.org/attachment/wiki/Tutorials/qNSE/aNgSgEmulator/sg-sdn.zip here].
 5. Configure ssh to allow tunneling by adding following line to `/etc/ssh/sshd_config`:
    `PermitTunnel yes`