Changes between Version 5 and Version 6 of Tutorials/m0SDN/aHowTo


Ignore:
Timestamp:
Aug 13, 2009, 3:48:28 PM (15 years ago)
Author:
akoshibe
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Tutorials/m0SDN/aHowTo

    v5 v6  
    1919
    2020=== The switch ===
    21 The centerpiece to the setup is the !OpenFlow enabled NEC IP8800/S3640-48T2XW switch running firmware supporting !OpenFlow v0.8.9. The switch is pre-configured so that ports 25-36 (the data VLAN) is an !OpenFlow virtual switch that listens to a controller running on the Console. The configurations can be altered by using the `setvsi` command in the switch's command-line interface.
     21One of the centerpieces to the setup is the !OpenFlow enabled NEC IP8800/S3640-48T2XW switch running firmware supporting !OpenFlow v0.8.9. The switch is pre-configured so that ports 25-36 (the data VLAN) is an !OpenFlow virtual switch that listens to a controller running on the Console. The configurations can be altered by using the `setvsi` command in the switch's command-line interface.
    2222The details behind configuring the virtual switch(es) on the IP8800 can be found [wiki:Documentation/OpenFlow/VirtualSwitch here].
    2323