Changes between Version 11 and Version 12 of Tutorials/k0SDR/Tutorial14

Timestamp:

Sep 9, 2015, 3:22:12 PM (9 years ago)

Author:

nilanjan

Comment:

—

Tutorials/k0SDR/Tutorial14

@@ -59 +59 @@
 
  * The Zynq parameters passed to the FPGA to configures the RF hardware and FFT engine \\
-  a) '--zynq_rx_freq 820e6' ----> sets Rx center frequency. Range of values: [400M 4000M] \\
-  b) '--zynq_rx_gain 10' -------> sets Rx amplifier gain. Range of values: [5.0 20.0] \\
-  c) '--zynq_fft_bins 256' -----> sets FFT size. Range of values must be power of 2: [8 256] \\
-  d) '--zynq_fft_scaling 170' --> sets FFT stage scaling. \\
-  e) '--zynq_avg_window 256' ---> sets time averaging across bins. Range of values: [1 256] \\
+  a) '--zynq_rx_freq 820e6' => sets Rx center frequency. Range of values: [400M 4000M] \\
+  b) '--zynq_rx_gain 10' => sets Rx amplifier gain. Range of values: [5.0 20.0] \\
+  c) '--zynq_fft_bins 256' => sets FFT size. Range of values must be power of 2: [8 256] \\
+  d) '--zynq_fft_scaling 170' => sets FFT stage scaling. \\
+  e) '--zynq_avg_window 256' => sets time averaging across bins. Range of values: [1 256] \\
 
  Note: the sampling rate not configurable and fixed at 30Msps.