USRP2 configration and data collection with OEDL script

Description

In this tutorial we'll demonstrate exactly what the title says.

Hardware / Software Resourcesutilized

1. 3 grid nodes with a USRP2 connect via Ethernet.
2. ubuntu-12-04-uhd-daemon.ndz: node image with all the precompiled software required to configure the USRPs.
3. uhd_exp1.rb - OEDL script executed on the console. This script configures the USRPs for data collection at specified frequencies, sampling rate, etc…
4. uhd_daemon - a node background process that bridges the gap between OMF commands and USRP2.

Set up

• To get started first make a reservation on the ​Orbit Scheduler.

• Let's pick 3 nodes with a USRP2. For a current list of nodes with USRPs, goto the ​Orbit Scheduler, click on Status Page under Quick Links. Select the Grid Tab and filter by SDR and USRP_N210 or SBX. This will give a topology list of nodes (below) that can be used with the OMF commands:

  [node1-1.grid.orbit-lab.org,node1-2.grid.orbit-lab.org,node1-19.grid.orbit-lab.org,node1-20.grid.orbit-lab.org,
  node2-1.grid.orbit-lab.org,node2-2.grid.orbit-lab.org,node2-19.grid.orbit-lab.org,node2-20.grid.orbit-lab.org,
  node19-1.grid.orbit-lab.org,node19-19.grid.orbit-lab.org,node19-20.grid.orbit-lab.org,node20-1.grid.orbit-lab.org,
  node20-19.grid.orbit-lab.org,node20-20.grid.orbit-lab.org,node1-1.sb3.orbit-lab.org,node1-2.sb3.orbit-lab.org]
  

• After logging into grid console, make sure all nodes are turned off

  nilanjan@console.grid:~$ omf tell -a offh -t node1-1.grid.orbit-lab.org,node1-2.grid.orbit-lab.org,node1-19.grid.orbit-lab.org,node1-20.grid.orbit-lab.org
  

• Verify state of node before continuing. Make sure all nodes are in the POWEROFF state.

  nilanjan@console.grid:~$ omf stat -t node1-1.grid.orbit-lab.org,node1-2.grid.orbit-lab.org,node1-19.grid.orbit-lab.org,node1-20.grid.orbit-lab.org
  

• Image nodes

  nilanjan@console.grid:~$ omf load -i ubuntu-12-04-uhd-daemon.ndz -r 20 -t node1-1.grid.orbit-lab.org,node1-2.grid.orbit-lab.org,node1-19.grid.orbit-lab.org,node1-20.grid.orbit-lab.org
  

• After nodes are imaged, verify that nodes are in POWEROFF state. Otherwise issue the following to turn them off for a reboot

  nilanjan@console.grid:~$ omf tell -a offh -t node1-1.grid.orbit-lab.org,node1-2.grid.orbit-lab.org,node1-19.grid.orbit-lab.org,node1-20.grid.orbit-lab.org
  

• Turn nodes back on and verify they are in POWERON state

  nilanjan@console.grid:~$ omf tell -a on -t node1-1.grid.orbit-lab.org,node1-2.grid.orbit-lab.org,node1-19.grid.orbit-lab.org,node1-20.grid.orbit-lab.org
  

• Download the OEDL experiment script ​uhd_exp1.rb to your local directory on the console. Executing this script will command one USRP2 to transmit a carrier frequency at random frequency offsets while commanding the others to continually take FFT snapshots and record the measurements to an database file. The contents of the uhd file is shown with additional comments:

  nilanjan@console.grid:~/UHD$ cat uhd_exp1.rb
  defProperty('freq',  1500e6, "Starting rx frequency")
  defProperty('dwell', 3, "Number of seconds at each frequency step")
  
  defGroup('txnode', 'node2-2.grid.orbit-lab.org') { |n|
  }
  
  defGroup('rxnode', 'node1-1.grid.orbit-lab.org,node20-20.grid.orbit-lab.org') { |n|
  }
  
  onEvent(:ALL_UP) do |event|
    info "Give machines some time to warm up" 
    wait 4
  
    info "activate"
    allGroups.uhd.u0.activate                         # starts UHD daemon
    wait 3
  
    info "set tx parameters"
    group("txnode").uhd.u0.txfreq = property.freq     # set tx frequency (Hz)
    group("txnode").uhd.u0.txrate = "8e6"             # set tx sampling rate
    group("txnode").uhd.u0.txgain = "30"              # set tx gain (dB)
    group("txnode").uhd.u0.txampl = "0.7"             # set tx wavform amplitude
    #group("txnode").uhd.u0.txwavefreq = "1e6"
    group("txnode").uhd.u0.txwavetype = "CONST"       # set type of waveform to transmit = {CONST, SINE, RAMP}
    group("txnode").uhd.u0.transmit                   # start transmitting
  
    group("rxnode").uhd.u0.rxfreq = property.freq     # set rx frequency
    group("rxnode").uhd.u0.rxrate = "8e6"             # set rx sampling rate
    group("rxnode").uhd.u0.rxgain = "25"              # set rx gain
    group("rxnode").uhd.u0.numbins = "128"            # number of fft points
    group("rxnode").uhd.u0.avgwinlen = "32"           # set averaging window size for each fft bin across time.
    group("rxnode").uhd.u0.omlfile = "spectrum.grid"  # oml database file name to store fft data
    group("rxnode").uhd.u0.omlserver = "idb2:3003"    # oml server
    group("rxnode").uhd.u0.record                     # start recording
  
    (0..30).each { |i|                                # set up loop    
      offset = (rand()*4).to_f                        # find next transmit frequency
      cf = property.freq + (offset*1e6)
      group("txnode").uhd.u0.txfreq = cf              # set new transmit frequency
      wait property.dwell                             # wait for a few seconds
    }
  
  
    allGroups.uhd.u0.stop                             # stop transmitting and stop recording
    allGroups.uhd.u0.deactivate                       # stop UHD daemon
  
    info "Finish it." 
    Experiment.done
  end
  

Execute script and view recorded data

• To run the experiment script:

  nilanjan@console.grid:~/UHD$ omf exec uhd_exp1.rb
  

• Once the script finishes, check the contents of the database file. The data should be recorded in spectrum.grid.sq3 on the oml server idb2.

  nilanjan@console.grid:~/UHD$ ssh idb2
  nilanjan@idb2:~$ cd /var/lib/oml2
  nilanjan@idb2:/var/lib/oml2$
  nilanjan@idb2:/var/lib/oml2$ ls -l spectrum.grid.sq3
  -rw-r--r-- 1 oml2 oml2 753561600 May 14 10:41 spectrum.grid.sq3
  

• Dump the contents of spectrum.grid.sq3 to have a quick look inside the sql file.

  nilanjan@idb2:/var/lib/oml2$ sqlite3 spectrum.grid.sq3 ".dump"
  PRAGMA foreign_keys=OFF;
  BEGIN TRANSACTION;
  CREATE TABLE _senders (name TEXT PRIMARY KEY, id INTEGER UNIQUE);
  INSERT INTO "_senders" VALUES('node20-20',1);
  INSERT INTO "_senders" VALUES('node1-1',2);
  CREATE TABLE _experiment_metadata (key TEXT PRIMARY KEY, value TEXT);
  INSERT INTO "_experiment_metadata" VALUES('start_time','1369071050');
  CREATE TABLE "spectrum_data" (oml_sender_id INTEGER, oml_seq INTEGER, oml_ts_client REAL, oml_ts_server REAL, "samplin
  g" INTEGER, "cfreq_MHz" REAL, "gain_dB" INTEGER, "FFTLength" INTEGER, "FFTNum" TEXT, "FFTBins" BLOB);
  INSERT INTO "spectrum_data" VALUES(1,1,0.534819999709725,211.009485,7692307,1500000000.0,25,128,'---',X'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');
  

• The magnitude value of the fft bins are stored in binary format. The first entry of the db file is shown above. So when dumping the file contents the fft bins data is shown as consecutive ASCII representation of the binary floating point numbers. The 1st is 84B7C43E ⇐⇒ 0.38421, the 2nd bin is 2146863D ⇐⇒ 0.065563, etc…

• To quickly visualize the data we can download and compile the following code.