Changes between Version 19 and Version 20 of Tutorials/k0SDR/Tutorial04a

Timestamp:

Apr 20, 2013, 1:48:00 AM (11 years ago)

Author:

nilanjan

Comment:

—

Tutorials/k0SDR/Tutorial04a

@@ -78 +78 @@
  * This will demonstrate using the waveform generator to create a signal at 5.002 GHz and using the USRPs to detect & record the signal. From the grid console enter the following to configure & run the waveform generator at 5.002 GHz with a -1 dBm power level.
 {{{
-nilanjan@console.grid:~/UHD/SPECTRUM/w$ wget -qO- http://instrument1.orbit-lab.org:5012/interference/stop
+nilanjan@console.grid:~/UHD/SPECTRUM/w$ wget -qO- http://instrument1.orbit-lab.org:5054/interference/stop
 OK
-nilanjan@console.grid:~/UHD/SPECTRUM/w$ wget -qO- http://instrument1.orbit-lab.org:5012/interference/set?frequency=5.002\&power=-1
+nilanjan@console.grid:~/UHD/SPECTRUM/w$ wget -qO- http://instrument1.orbit-lab.org:5054/interference/set?frequency=5.002\&power=-1
 OK
-nilanjan@console.grid:~/UHD/SPECTRUM/w$ wget -qO- http://instrument1.orbit-lab.org:5012/interference/start
+nilanjan@console.grid:~/UHD/SPECTRUM/w$ wget -qO- http://instrument1.orbit-lab.org:5054/interference/start
 OK
 }}}
@@ -93 +93 @@
  * After the application as completed turn off the waveform generator.
 {{{
-nilanjan@console.grid:~/UHD/SPECTRUM/w$ wget -qO- http://instrument1.orbit-lab.org:5012/interference/stop
+nilanjan@console.grid:~/UHD/SPECTRUM/w$ wget -qO- http://instrument1.orbit-lab.org:5054/interference/stop
 OK
 }}}