Changes between Version 16 and Version 17 of Tutorials/k0SDR/Tutorial01b

Timestamp:

Jun 12, 2015, 1:43:58 PM (9 years ago)

Author:

nilanjan

Comment:

—

Tutorials/k0SDR/Tutorial01b

@@ -8 +8 @@
 === Hardware / Software Resources utilized ===
  1. Grid nodes with a USRP2 connect via Ethernet.
- 2. ''baseline-12-04-gnu.ndz'': disk image loaded onto nodes. This image has all the precompiled - software required to configure the USRP2s and all the required GNU Radio software libraries. The USRP2's interface with the node is already configured.
+ 2. ''ubuntu-14-04-64bit-sdr.ndz'': disk image loaded onto nodes. This image has all the precompiled - software required to configure the USRP2s and all the required GNU Radio software libraries. The USRP2's interface with the node is already configured.
  3. GNU Radio - software library to create SDR. Click here for [http://gnuradio.org/redmine/projects/gnuradio/wiki/WhatIsGR additional info].
  4. USRP2 - hardware platform for SDR. Click here for [http://gnuradio.org/redmine/projects/gnuradio/wiki/Hardware#Ettus-Research-USRP-Devices more info].
@@ -27 +27 @@
  * Image nodes. Two (2) are required to run - check [https://www.orbit-lab.org/cPanel/controlPanel/start inventory status] to find nodes with 2 similar USRP2s. In this examples we'll use node1-1 and node1-2.
 {{{
-nilanjan@console.grid:~$ omf load -i baseline-12-04-gnu.ndz -t node1-1,node1-2
+nilanjan@console.grid:~$ omf load -i ubuntu-14-04-64bit-sdr.ndz -t node1-1,node1-2
 }}}