Changes between Version 7 and Version 8 of Tutorials/g0WmLTE/Tutorial5

Timestamp:

Oct 22, 2015, 9:04:36 PM (9 years ago)

Author:

stojadin

Comment:

—

Tutorials/g0WmLTE/Tutorial5

@@ -5 +5 @@
 This tutorial also assumes basic familiarity with [http://en.wikipedia.org/wiki/LTE_%28telecommunication%29 LTE standard]. It uses [http://www.openairinterface.org/ OpenAirInterface] open source software implementation of LTE basestation (eNodeB or eNB) and modem (user equipment or UE) developed at [http://www.eurecom.fr/en Eurecom]. The tutorial given here is based on the [https://twiki.eurecom.fr/twiki/bin/view/OpenAirInterface/HowToConnectOAIENBWithOAIUEWithoutS1Interface] tutorial.
 
-The image used for this experiment is oai-nos1.ndz. Image uses Ubunutu 14.04 and has low-latency 3.13 kernel install and UHD drivers needed for B210/X310 USRPs (UHD 3.8.2)) as well as the !OpenAirInteface source code installed in /root/openairinterface5g/. More details on various build options are available on [https://twiki.eurecom.fr/twiki/bin/view/OpenAirInterface/AutoBuild OpenAirInterface build page].
+The image used for this experiment is 'oai-git-master.ndz'. Image uses Ubunutu 14.04 and has low-latency 3.13 kernel install and UHD drivers needed for B210/X310 USRPs (UHD 3.8.2)) as well as the !OpenAirInteface source code installed in /root/openairinterface5g/. More details on various build options are available on [https://twiki.eurecom.fr/twiki/bin/view/OpenAirInterface/AutoBuild OpenAirInterface build page].
 
 In this tutorial we will use nodes equipped with USRP B210 and have the basestation on node1-1 and modem on node1-2 on sandbox 1. 
@@ -24 +24 @@
 
 {{{
-source /root/openairinterface5g/oaienv
-
 source /root/openairinterface5g/targets/bin/init_nas_nos1
 }}}