Changes between Initial Version and Version 1 of Tutorials/g0WmLTE/Tutorial4-OAI/Tutorial2

Timestamp:

Nov 11, 2016, 7:15:19 PM (7 years ago)

Author:

msherman

Comment:

—

Tutorials/g0WmLTE/Tutorial4-OAI/Tutorial2

@@ +1 @@
+== OAI RRH on ORBIT, eNB Running on GENI
+
+This tutorial assumes you have a GENI account, and can reserve resources in the Rutgers instageni rack, as well as the Rutgers ORBIT testbed. You will need a reservation for grid.orbit-lab.org
+
+This example uses node18-2 in the ORBIT Grid as the RRH, node 19-3 as the client, and pc4.instageni.rutgers.edu as the remote eNB, with the mme.orbit-lab.org acting as the EPC.
+1. With a valid GENI Project and Slice, use the attached RSPEC to reserve resources in the Rutgers Instageni Rack.
+ 1. You will need to modify it to ensure your SSH keys are added properly.
+1. Execute the following commands on the grid console, from separate ssh sessions (They can be done at the same time)
+ 1. {{{ omf load -t node18-2 -i oai-rrh.ndz }}}
+ 1. {{{ omf load -t node19-3 -i baseline.ndz }}}
+1. After they are imaged, turn the nodes on
+ 1. {{{ omf tell -a on -t node18-2,node19-3 }}}
+1. Open a ssh session to each device
+ 1. {{{ ssh root@node18-2.grid.orbit-lab.org }}}
+ 1. {{{ ssh root@node19-3.grid.orbit-lab.org }}}
+1. On node18-2
+ 1. Run script {{{ ./quickbuild_rrh.sh }}}
+ 1. Run script {{{ ./run_rrh.sh }}}
+1. On node18-1
+ 1. Run script {{{ ./quickbuild_enb.sh }}}
+ 1. Run script {{{ ./run_enb.sh }}}
+1. After executing both run scripts, you should see the RRH node load a USRP image, and the eNB node start printing log messages.
+1. On node19-3
+ 1. Follow the instructions from the [wiki:Tutorials/g0WmLTE/Tutorial3 COTS UE tutorial] to connect.
+