Changes between Version 18 and Version 19 of Tutorials/g0WmLTE/Tutorial4-OAI/Tutorial1

Timestamp:

Feb 13, 2018, 7:55:24 PM (7 years ago)

Author:

msherman

Comment:

—

Tutorials/g0WmLTE/Tutorial4-OAI/Tutorial1

@@ -27 +27 @@
  1. Run script {{{ ./quickbuild_enb.sh }}}
  1. Run script {{{ ./run_enb.sh }}}
+1. If you have trouble running or connecting to the MME, examine the following:
+ 1. on the eNB, open the relevant file in the conf folder.
+ 1. ensure the lines {{{ENB_IPV4_ADDRESS_FOR_S1_MME}}} and {{{ENB_IPV4_ADDRESS_FOR_S1U}}} match the node's interface address.
+ 1. Enter the IP of an available MME for {{{ mme_ip_address      = ( { ipv4       = "10.3.0.250"}}} , you may need to modify this if you aren't using the default ORBIT MME.
 
 1. After executing both run scripts, you should see the RRH node load a USRP image, and the eNB node start printing log messages.