Go back —> Tutorials

How to define and use Topologies in an experiment script

Prerequisite

This feature is only available in NodeHandler v4 and above.

Before going through this tutorial, you should know the basics of writing and running an experiment script (see here and here).

You should also have installed a disk image with Node Agent v4 on the nodes of the testbed you are using (e.g. "baseline.ndz"). See How to install a disk image.

Goal

In this tutorial, you will learn a simple way to define and use topology in your experiments.

As explained here, after installing an image on all the nodes of a testbed, 3 default topologies will be generated. One of them (system:topo:active) defines all the nodes that were correctly imaged. In other words, it contains a list of all nodes on the testbed that are currently working and have the requested disk image.

In this tutorial experiment, you will use this default active topology to create your own topologies to use in your experiments.

The tutorial experiment

This experiment is given in the attached script tut_topo_1.rb​.

This file contains extensive comments that should help you understand the different steps involved in defining and using topologies.

You can find more detailed information on the available commands to define topologies here.

To run this example script, use the following command:

 orbit exec tut_topo_1

The Results

The experiment screen output should then look like this​. And the experiment log file should look like this​.

You can also access the results of this particular experiment example in the MySQL database, using the experiment ID: "grid_2007_08_27_20_45_37" (please refer to this page for more information on accessing the results).

More…

This other script tut_topo_1_more.rb​ contains an extended version of the above script with more optional features.