Go back —> Tutorials

How to query the status of the nodes of a Testbed

If you have not done so yet:

• ​Register for an account
• ​Make a reservation on the Schedular for a given tesbed

Lets assume that you registered as user 'bob' and made a reservation for the 'grid' testbed. You then access the 'grid' console using the command:

 ssh bob@console.grid.orbit-lab.org

Then, to query the status of some nodes on the 'grid' testbed, use the command:

 statnode all
 # will query the status of the entire set of 20x20 nodes on the 'grid'
 
 statnode 3,1 5,6 1,1..2 
 # will query the status of nodes 3,1 and 5,6 and 1,1 and 1,2

The complete available option/commands for statnode are:

  statnode --help

  Returns the status of the nodes in a testbed
Usage:
      status [OPTION] NODES NODES NODES ...
      status [OPTION] COMMAND
 
      [OPTION] are: 
      -h, --help         print this help message
      -d, --domain NAME  query nodes on the testbed NAME (default is the testbed where this command is executed)
 
      Valid NODES format are: 
      all                returns status of all nodes 
      x,y                returns status of the node at coordinate ( x , y )
      x1..x2,y           returns status of all the nodes with coordinates in the range ( [x1..x2] , y )
                         (other valide combinations:  x1..x2,y1..y2   and   x,y1..y2 )
 
      Valid COMMAND are: 
      -t, --topo FILENAME  return status of nodes from the topology file FILENAME
      -on, --counton       return the number of nodes in 'ON' state
      -off, --countoff     return the number of nodes in 'OFF' state
      -ko, --countko       return the number of nodes in 'Not Available' state
 
      Examples:
               status all
               status 1,1 4,2 6,3..5
               status --d sb1 1,1..2
               status --domain sb2 all
               status --topo topo_grid_active.rb
               status -on
               status --countoff