Hive Monitoring

Advisors: Richard Howard, Richard Martin

Group Members: Tate Sparks, Shrinidhi Kesavan, Sarah Benedicto, Evan Kohut, Andrew Martin, Benjamin Yu, Sonia Malhotra

Overview

This study seeks to evaluate how bees are impacted by electromagnetic radio frequency (RF) waves emitted by humans. Similarly to how the lead epidemic has affected humans, radio frequency could prove to have an adverse effect on bee mortality.

Setup

Project Schematic: The apparatus connecting the hive and the outside will split into two identical paths made of glass tubes with coils surrounding the tubes. One coil at a time will generate a magnetic field. The camera positioned above the tubes will record videos of the bees moving between the hive and the outside. These videos will then be given to a neural network to detect patterns in the behavior of the bees due to the presence of the magnetic field.

A Raspberry Pi board positioned above the apparatus controls the magnetic field. A black box surrounding the area where the videos are being recorded blocks out external light and provides constant lumination from a lamp.

Hive Camera

A wide-angle camera and 4 IR lights are sealed inside a hive frame. A Raspberry Pi takes video and rectifies the fisheye image distortion.

Progress

Week 1

Project Goal: The project's objective is to assess electromagnetic radio frequency (RF) impact on bees, particularly bee mortality, inspired by the lead epidemic's significance. It aims to examine how human-emitted RF affects bee populations and ecosystems.

Apparatus Mockup: Creating an apparatus in which the bees would come through from the tubes. The raspberry pi would be placed directly above the apparatus and the current would run through the apparatus.

Machine Learning Analysis: In the process of using pytorch libraries to test the machine learning scripts.

Week 2

Experiment Design:

Apparatus Construction: Modeled and figured out the correct sizing of it. The correct dimensions were found in order to cut and build the base. The glass tubes were cleaned and fixed. Lastly, a camera mount was established.

Raspberry Pi: ILAB was starting to get set up as well as running the machine learning scripts. Raspberry Pi Pinout was studied and code was written on it to control different states of the magnetic field.

Week 3

Camera Setup:

Data Collection: Videos of the bees were collected using the Raspberry Pi. The motion of the bees was observed depending on the different magnetic states. Machine learning would be used to analyze these videos.

Eliminating Extraneous Sources:

Week 4

Control Data: There was an expected 50% accuracy. It was also determined that there could be an issue with the distribution of the data. A spreadsheet was created to amend this issue by manually verifying states.

Log File Formatting:

Fisheye Camera:​https://www.orbit-lab.org/attachment/wiki/Other/Summer/2023/Hive/Screenshot%202023-08-09%20at%2011.25.03%20AM.png

Week 5

Camera Calibration: Used the OpenCV camera calibration library to correct the fisheye camera's image distortion.

Machine Learning: The neural network was being trained to detect behavioral responses from the bees and the magnetic field. PyTorch libraries were utilized to run the machine learning scripts. Accuracy indicates how well the neural network classified the videos.

Week 6

Alternating Current Circuits:

Camera Distortion: A wooden frame was glued together to form a rectangle. To fill the area of this rectangle, cardboard was placed. Another frame was made but that area was to be filled with glass. The purpose of these two frames is to lodge the camera between them and see out the glass side. Another aspect of the camera that was worked on was the video footage itself, which needed to be less distorted.

Frame Dataset Corrections:

Week 7

Accomplishments:Fixed the issues with the cropping in the video. Manually created datasets to run. Soldered wires to the resistors, wrapped wire around the glass tubes in the bee apparatus and connected the soldered wires to the Raspberry pi. Ran the circuit and collected data on bee motion with the AC current.

Camera: Two more IR lights were soldered in parallel for more even light distribution. The video capture code and undistortion code were combined. Used POE(Power Over Ethernet) to run power and data over 50 feet to the Raspberry Pi.

Week 8

Week 9

Final Week

Presentations

Week 1 ​https://docs.google.com/presentation/d/1MtKp_Q4kYj8rK5n1t4eCN10S3px53kY4lWW0k9Y2XSs/edit?usp=sharing
Week 2 ​https://docs.google.com/presentation/d/1ADvK4neFgE9My_yHJRX4hd7cKdQ70z3zusmd4PjSqkE/edit?usp=sharing
Week 3 ​https://docs.google.com/presentation/d/1Gh0W6tGCZ73KXImxl8CZYhpTA0nsuiyrOs0CsUNcRbU/edit?usp=sharing
Week 4 ​https://docs.google.com/presentation/d/1pCnK6VBakeFyNgBYtZI9LUvJrwMotd29TzDQ_zN5YRw/edit?usp=sharing
Midway Progress ​https://docs.google.com/presentation/d/1BGfHoxGJ2W533OdZRhyn6lgF7OyR_DEVRs87jQCrT-Y/edit?usp=sharing
Week 6 ​https://docs.google.com/presentation/d/1uop2ytlSdMh5aFQvZgZPGiPWpo7b0tTZ4oaqu9TswJc/edit?usp=sharing
Week 7 ​https://docs.google.com/presentation/d/1k87TEy9SG5kleGvpUR2P4fqSRZFa3vHKRRMU991VSjY/edit?usp=sharing
Week 9 ​https://docs.google.com/presentation/d/1zJmH06sIY6u5Fpm4AA8TGh8lVHojb4kt9Rd9DZil3FI/edit#slide=id.p