Changes between Version 80 and Version 81 of Other/Summer/2023/Hive

Timestamp:

Aug 9, 2023, 4:00:52 PM (16 months ago)

Author:

ben14yu

Comment:

—

Other/Summer/2023/Hive

@@ -56 +56 @@
 **Alternating Current Circuits**:
 
-**Hive Camera**: Began working on the deployment of the camera to the hive. Enclosed the camera with 2 IR lights in a hive frame. Sealed the frame with plastic poster board and aluminum tape. Doing so prevents the bees from chewing through to the camera. 
+**Hive Camera**: Began working on the deployment of the camera to the hive. Enclosed the camera with 2 IR lights in a hive frame. Sealed the frame with plastic poster board and aluminum tape. Doing so prevents the bees from chewing through to the camera. Placed Raspberry Pi in a weatherproof box and mounted it externally to the hive.
 
 **Frame Dataset Corrections**: Encountered issues with the video frames when creating the dataset. But the code was modified to increment variables. 
@@ -64 +64 @@
 **Accomplishments**:Fixed the issues with the cropping in the video. Manually created datasets to run. Soldered wires to the resistors, wrapped wire around the glass tubes in the bee apparatus and connected the soldered wires to the Raspberry pi. Ran the circuit and collected data on bee motion with the AC current.
 
-**Hive Camera**: Two more IR lights were soldered in parallel for more even light distribution. The video capture code and undistortion code were combined. Used POE(Power Over Ethernet) to run power and data over 50 feet to the Raspberry Pi.
+**Hive Camera**: Two more IR lights were soldered in parallel for more even light distribution. The video capture code and undistortion code were combined. Used POE(Power Over Ethernet) to run power and data over 50 feet between the garage and the hive.
 
 == **Week 9**\\