Context Navigation

Hive

-              v73
+              v74
 == **Week 3**\\
-**Camera Setup**:
 **Data Collection**: Videos of the bees were collected using the Raspberry Pi. The motion of the bees was observed depending on the different magnetic states. Machine learning would be used to analyze these videos.
 …
 **Alternating Current Circuits**:
 **Camera Distortion**:  Began working on the deployment of the camera to the hive. Enclosed the camera with 2 IR lights in a hive frame. Sealed the frame with plastic poster board and aluminum tape. Doing so prevents the bees from chewing through to the camera.
+**Camera Distortion**: A wooden frame was glued together to form a rectangle. To fill the area of this rectangle, cardboard was placed. Another frame was made but that area was to be filled with glass. The purpose of these two frames is to lodge the camera between them and see out the glass side. Another aspect of the camera that was worked on was the video footage itself, which needed to be less distorted.
 **Frame Dataset Corrections**: Encountered issues with the video frames when creating the dataset. But the code was modified to increment variables.
 …
 **Camera**: Two more IR lights were soldered in parallel for more even light distribution. The video capture code and undistortion code were combined. Used POE(Power Over Ethernet) to run power and data over 50 feet to the Raspberry Pi.
-== **Week 8**\\
 == **Week 9**\\