Context Navigation

Hardware

-              v2
+              v3
 The parts list for the car is not finalized yet, but some design specifications are known:
 * Track width (distance between tires on each axle) should be approximately 6 in.
+* Car will be rear-wheel drive, with a single motor (as opposed to a direct drive motor for each wheel)
+* Car will be rear-wheel drive, with a single motor (as opposed to a direct drive motor for each wheel).
+* Steering will be implemented using a servo motor with an Ackermann linkage, as with an RC car.
+* The car will need a rear differential to avoid tire slip on turns.