Orbit > Building > Notes > Comments on the PXE Makefile

Comments on the PXE Makefile

Current Status 2/18/2014

The current build package for making pxe images lives on:

console.sb5.orbit-lab.org:/root/pxe/omf/pxe/

In there is a make master make file with all the parameters to build the kernel / initramfs image pair. It will also build a pxelinux.bin from sources. This version of pxelinux.bin doesn't need to match with kernel / initramfs pair.

in the Makefiel the values of the following variables control what kernel directory the make process will consult to build a kernel:

KERNEL_VERSION = 3
KERNEL_PATCHLEVEL = 0
KERNEL_SUBLEVEL = 4

In the /root/pxe/omf/pxe/src directory should be a directory named linux-VERSIONNUMBERS. In this directory is the config file for the kernel being built.

Additionally ins the same source dir is a busbox-VERSION directory with a .config file that controls what features are built into busybox.

Makefile

PXE has a 'changelog' in the top directory. The following extracts the version number from the first line in the changelog - enjoy:

   	24  	VER = $(shell grep -o -E '[0-9]+\.[0-9.-]+' -m 1 changelog)  

The following line copies a directory from one place to the other, but without ".svn" directories and emacs temporary files (*~)

   	119  	        tar -C static --exclude=.svn --exclude='*~' -cf - . | (cd $(RDISK); tar -xf -) 

The image target should now exist on its own (the incuded software is a sub target). I just added a few 'sudo' commands to allow it to compile from a user account.

The main addition is the apt target:

   	141  	apt: dirs kernel image  
  	142 	        @echo Building APT V$(VER)  
  	143 	        rm -rf $(BUILD_APT_DIR)  
  	144 	        install -d $(BUILD_APT_DIR)  
  	145 	        cp -rp debian $(BUILD_APT_DIR)  
  	146 	        rm -rf $(BUILD_APT_DIR)/debian/.svn       
  	147 	        mv $(BUILD_APT_DIR)/debian/Makefile $(BUILD_APT_DIR)  
  	148 	        cp changelog $(BUILD_APT_DIR)/debian  
  	149 	        cp ../copyright $(BUILD_APT_DIR)/debian  
  	150 	        if [ -r README.debian ] ; then \  
  	151 	                cp README.debian $(BUILD_APT_DIR)/debian; \  
  	152 	        fi  
  	153 	        env O_VER=$(VER) O_KERNEL_V=$(KERNEL_VERSION) $(MAKE) -C $(BUILD_APT_DIR) deb  
  	154 	#       $(MAKE) DESTDIR=$(BUILD_APT_DIR)/debian/$(APT_NAME) install  
  	155 	 
  	156 	apt-install: apt  
  	157 	        scp $(BUILD_APT_DIR)/../*.deb $(REPOSITORY):$(REPOSITORY_ROOT)/binary  
  	158 	        ssh $(REPOSITORY) sudo $(REPOSITORY_ROOT)/rebuild.sh  

The BUILD_APT_DIR variable was defined above, but it's in build. 143 and 144 create new apt directory. I added a new top level directory 'debian' to hold all the debian related files. This directory is copied into the apt build area (145, 146 - Should really be using something similar to 119). The 'debian' directory contains the Makefile which should really be a level up in the build area. Debian apt's also need a change log which we copy into the build area (148) as well. Same goes for the copyright file which we take from the nodehandler proper (149), and the README.debian, if it exists (150-152). 153 is a bit tricky. Basically we need to know the version of this apt, as well as the kernel version for the 'install' target in 'debian/Makefile'. However, we are calling the 'deb' target, which calls some dpkg util, which ultimately uses the 'debian/rules' file to call the 'install' target of 'debian/Makefile' - still following? In short, we put the two versions into environment variables "env O_VER=… make …' before calling the first make which the 'install' target can retrieve and use (remember a non-initialized Makefile variable takes it's value from an environment variable of the same name if it exists).

debian/Makefile

install:
	echo "INSTALL $(O_VER) $(O_KERNEL_V)"
	install -d $(TFTP_DIR)
	install -m666 ../initrd-orbit-pxe-$(O_VER).img $(TFTP_DIR)
	install -d $(CFG_DIR)
	sed -e s/@KERNEL_VER@/$(O_KERNEL_V)/ ../../config/default.orbit | sed -e s/@VER@/$(O_VER)/ > $(CFG_DIR)/default.orbit-$(O_VER)
	install -m755 ../../config/makeLink $(CFG_DIR)

The O_VER and O_KERNEL_V come form the environment variables defined in 153 above. This apt installs the image we built into /tftpboot, as well as 'default.orbit-XXX' and 'makeLink' in /tftpboot/pxelinux.cfg. The 'default.orbit-XXX' file is created from the template stored in the config directory.

DEFAULT boel

LABEL boel
KERNEL linux-@KERNEL_VER@
APPEND vga=extended root=/dev/ram0 rw load_ramdisk=1 prompt_ramdisk=1 ramdisk_size=32768 init=/vmlinuz initrd=initrd-orbit-pxe-@VER@.img console=ttyS0,9600
DISPLAY message.txt
PROMPT 1
TIMEOUT 1