Orbit + OpenBTS

All that you will need to create a tiny GSM network using Orbit Hardware is a GSM Phone, any SIM Card and the OpenBTS software. Actually you need a few more pieces of software but they are included in the steps below. The additional software is Asterisk which handles Voice over IP, you need Asterisk because OpenBTS "just" implements the GSM wireless communication between the phone and the base station, but asterisk stitches voice calls together using the TCP/IP stack. Additional software also includes SMQueue to give you Text Messaging and the NMCli.py software makes it easy to add "subscribers" to your tiny GSM network.

The following book was my guide when I was doing this install → ​http://openbts.org/site/wp-content/uploads/ebook/Getting_Started_with_OpenBTS_Range_Networks.pdf

The first thing you should ask is → Which SDR's does OpenBTS support for GSM? → ​http://openbts.org/w/index.php/RadioIntegration

I have had all of my success with the N210, which was available on Orbit Sandbox 3 at the time of writing this article. How did I know the N210 was available on SB3? → If you can find the "Orbit Online Scheduler" then you should be able to find the "Orbit Status Page", you can ask the "Orbit Status Page", "On which nodes is the N210 installed?"

Once you know which box is hosting your target SDR, the next thing you should do is to verify that the SDR is working on your target box.

Starting from scratch, let's make sure we start with an Image that already has SDR support:

davemsolomon@console.sb3:~$ omf load -t node1-1 -i ubuntu-14-04-64bit-sdr.ndz
davemsolomon@console.sb3:~$ omf tell -a on -t node1-1

SSH to the target box with the SDR:

davemsolomon@console.sb3:~$ ssh root@node1-1

Before doing anything with OpenBTS, make sure the SDR is happy:

root@node1-1:~# uhd_usrp_probe
linux; GNU C++ version 4.8.2; Boost_105400; UHD_003.008.002-86-g566dbc2b

-- Opening a USRP2/N-Series device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes
  _____________________________________________________
 /
|       Device: USRP2 / N-Series Device
|     _____________________________________________________
|    /
|   |       Mboard: N210r4
|   |   hardware: 2577
|   |   mac-addr: 00:80:2f:0a:cc:db
|   |   ip-addr: 192.168.10.2
|   |   subnet: 255.255.255.255
|   |   gateway: 255.255.255.255
|   |   gpsdo: none
|   |   serial: F297B6
|   |   FW Version: 12.4
|   |   FPGA Version: 10.1
...

OK! the SDR looks happy! Let's move on.

Install the dependencies

root@node1-1:~# apt-get install software-properties-common python-software-properties
root@node1-1:~# add-apt-repository ppa:git-core/ppa
root@node1-1:~# apt-get update
root@node1-1:~# apt-get install git
root@node1-1:~# apt-get install bind9
root@node1-1:~# apt-get -f install

Download and prepare to build OpenBTS, Asterisk, SMQueue and Node Manager

root@node1-1:~# git clone https://github.com/RangeNetworks/dev.git
root@node1-1:~# cd dev
root@node1-1:~/dev# ./clone.sh
root@node1-1:~/dev# ./switchto.sh master

Build packages for OpenBTS with support for our SDR as well as Asterisk, SMQueue and Node Manager:
(this will take about 10 minutes, grab a cup of coffee)

root@node1-1:~/dev#./build.sh N210 

Now that all of our packages are built, let's install OpenBTS:

root@node1-1:~/dev# cd BUILDS/
root@node1-1:~/dev/BUILDS# cd 2015-10-13--03-22-27/
root@node1-1:~/dev/BUILDS/2015-10-13--03-22-27# dpkg -i openbts_5.0_amd64.deb

Now that we have installed OpenBTS let's verify that OpenBTS is happy with our SDR:

root@node1-1:~/dev/BUILDS/2015-10-13--03-22-27# cd /OpenBTS/
root@node1-1:/OpenBTS# ./transceiver
linux; GNU C++ version 4.8.2; Boost_105400; UHD_003.008.002-86-g566dbc2b

Using internal clock reference
-- Opening a USRP2/N-Series device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes

Excellent! Let's start OpenBTS and make sure there aren't any errors in the log:

root@node1-1:/OpenBTS# service openbts start
openbts start/running, process 12711

root@node1-1:/OpenBTS# tail /var/log/upstart/openbts.log
--   Successfully tuned to 945.200000 MHz
--
1444721928.697975 139804996573056:
system ready

1444721928.698023 139804996573056:
use the OpenBTSCLI utility to access CLI

1444721928.698218 139804996573056: OpenBTSCLI network socket support for tcp:49300

Perfect!

Let's add text message support:

root@node1-1:/OpenBTS# cd ~/dev/BUILDS/2015-10-13--03-22-27/
root@node1-1:~/dev/BUILDS/2015-10-13--03-22-27# dpkg -i smqueue_5.0_amd64.deb
root@node1-1:~/dev/BUILDS/2015-10-13--03-22-27# service smqueue start
smqueue start/running, process 12904

Let's check the SMQueue Logs:

root@node1-1:~/dev/BUILDS/2015-10-13--03-22-27# tail /var/log/upstart/smqueue.log
EMERG 0:12904 2015-10-13T03:45:50.6 ../SR/SubscriberRegistry.cpp:183:init: /var/lib/asterisk/sqlite3dir does not exist
ALERT 12904:12904 2015-10-13T03:45:50.7 smqueue.cpp:2798:main: smqueue (re)starting
smqueue logs to syslogd facility LOCAL7, so there's not much to see here

I think that is healthy.

At this point we can most likely prove text messaging works, let's add a subscriber to our tiny GSM network: