Changes between Version 10 and Version 11 of Old/Hardware/hNodes/cNodeVer3/dAssembly/bCM


Ignore:
Timestamp:
Sep 20, 2012, 3:24:20 PM (12 years ago)
Author:
Ilya Chigirev
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Old/Hardware/hNodes/cNodeVer3/dAssembly/bCM

    v10 v11  
    99  3. align the 3 stand offs with the 3 triangle oriented holes on the front left corner of the top of the U chassis.
    1010  4. thread the other end of the flat serial cable (The other side should be going through slit on top of the face plate) in between the standoffs as to keep it in place and above the fan, them use the 3 3/16" 100 degree screws to attach the cm to the U chassis.
     11
     12==== Flashing the CM ====
     13Full instructions for flashing the CM3 can be found [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/02-SoftwareDescription#FlashingFirmware here].