Changes between Version 34 and Version 35 of Old/Hardware/hNodes/cNodeVer3/dAssembly/aCase


Ignore:
Timestamp:
Jun 19, 2013, 12:01:48 AM (11 years ago)
Author:
ssugrim
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Old/Hardware/hNodes/cNodeVer3/dAssembly/aCase

    v34 v35  
    1111  * ETH1 PXE first device on boot list, hard drive should be the second
    1212[[BR]]
    13 ===== Motherboard & Case Assembly =====
     13====== Motherboard & Case Assembly ======
    1414//'''These instructions are the generic instructions for all nodes. Please check each individual motherboard page for specific instructions relating to that motherboard model'''//[[BR]][[BR]]
    15 ===== Components =====
     15====== Components ======
    1616[[Image(ComponentList.jpg, 300, align=center)]] [[BR]]
    1717 || '''System''' ||  ||
    … …  
    4141[[BR]]
    4242[[BR]]
    43 ===== Main U chassis =====
     43====== Main U chassis ======
    4444 1. Install the wireless cards onto the motherboard first as it may be difficult to reach once the motherboard is in the case.
    4545  * Make sure to install any pigtails at this time as well
    … …  
    8686   * The rear of the top cover should go below the cap.
    8787
    88 ===== Antenna Placement =====
     88====== Antenna Placement ======
    8989This is a diagram of the proper antenna placement for all nodes.
    9090There are a total of 5 cards that can be placed in the Nodes. Since the node has only 1 mini-pci and 1  pci express slot however, there are only a few combinations of cards.