Changes between Version 32 and Version 33 of Old/Hardware/hNodes/cNodeVer3/dAssembly/aCase


Ignore:
Timestamp:
Jun 18, 2013, 11:50:25 PM (11 years ago)
Author:
seskar
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Old/Hardware/hNodes/cNodeVer3/dAssembly/aCase

    v32 v33  
    1111  * ETH1 PXE first device on boot list, hard drive should be the second
    1212[[BR]]
    13 ====== Motherboard & Case Assembly ======
     13===== Motherboard & Case Assembly =====
    1414//'''These instructions are the generic instructions for all nodes. Please check each individual motherboard page for specific instructions relating to that motherboard model'''//[[BR]][[BR]]
    15 ====== Components ======
     15===== Components =====
    1616[[Image(ComponentList.jpg, 300, align=center)]] [[BR]]
    1717 || '''System''' ||  ||
    … …  
    4141[[BR]]
    4242[[BR]]
    43 ====== Main U chassis ======
     43===== Main U chassis =====
    4444 1. Install the wireless cards onto the motherboard first as it may be difficult to reach once the motherboard is in the case.
    4545  * Make sure to install any pigtails at this time as well
    … …  
    8686   * The rear of the top cover should go below the cap.
    8787
    88 ====== Antenna Placement ======
     88===== Antenna Placement =====
    8989This is a diagram of the proper antenna placement for all nodes.
    9090There are a total of 5 cards that can be placed in the Nodes. Since the node has only 1 mini-pci and 1  pci express slot however, there are only a few combinations of cards.