Changes between Version 15 and Version 16 of Old/Hardware/hNodes/cNodeVer3/dAssembly/aCase

Timestamp:

Sep 20, 2012, 4:58:42 PM (12 years ago)

Author:

Ilya Chigirev

Comment:

—

Old/Hardware/hNodes/cNodeVer3/dAssembly/aCase

@@ -1 +1 @@
 [[TOC(Hardware/fAssembly/*, depth=3)]]
 
-== Case Assembly ==
-=== Bench Test ===
+=== Case Assembly ===
+==== Bench Test ====
  1. Place unpacked motherboard on bench and connect power supply, monitor, and USB keyboard
  2. Connect hard drive to motherboard and power supply
@@ -12 +12 @@
   * ETH1 PXE first device on boot list, hard drive should be the second
 [[BR]]
-=== Motherboard & Case Assembly ===
+==== Motherboard & Case Assembly ====
 '''These instructions are the generic instructions for all nodes. Please check each individual motherboard page for specific instructions relating to that motherboard model'''[[BR]]
-==== Components ====
+===== Components =====
 [[Image(ComponentList.jpg, 300)]]
  || '''System''' ||  ||
@@ -87 +87 @@
    * The rear of the top cover should go below the cap.
 
-=== Antenna Placement === #Antenna
+==== Antenna Placement ==== #Antenna
 This is a diagram of the proper antenna placement for all nodes.
 There are a total of 5 cards that can be placed in the Nodes. Since the node has only 1 mini-pci and 1  pci express slot however, there are only a few combinations of cards.
@@ -109 +109 @@
 
 
-
-
-
 [[Image(NodeAntenna.jpg, 600)]]