Changes between Version 11 and Version 12 of Internal/USBNoise/WiBo

Timestamp:

Jun 24, 2006, 8:47:30 PM (18 years ago)

Author:

seskar

Comment:

—

Internal/USBNoise/WiBo

@@ -1 +1 @@
 == USB Noise Generator: !WiBo (Wireless Board) ==
 
-WiBo102 is a RF Front-End board designed around a Maxim, Inc. [attachment:MAX2828-9ds.pdf MAX2829ETN+D] radio transceiver chip. This chip incorporates most of the radio functions except for the reference oscillator, baseband I/Q amps, power amps and antenna switches. The block diagram of WiBo board  is show in Figure 1.
+WiBo102 is a RF Front-End board designed around a Maxim, Inc. [attachment:MAX2828-9ds.pdf MAX2829ETN+D] radio transceiver chip. This chip incorporates most of the radio functions except for the reference oscillator, baseband I/Q amps, power amps and antenna switches. The block diagram of WiBo board  is show in Figure 1 with the full schematic in the [attachment:WIBO103.pdf attachment].
 
 [[Image(WiBo-BD.jpg, title="Figure 1: WiBo Block Diagram")]]
@@ -39 +39 @@
 NOTE! Do not turn on both the 2GHz and the 5GHz power amps at the same time!  ALSO! Do not turn on both the RXENA and TXENA lines (not sure why?).
 
-
 [[Image(WiBo-lowres.jpg)]]