OMF Demonstration for GEC4 (March 09)

• Updated overview illustration of the demo:

Fig 1. Demo Setting

Step 1: Install new Grid Service.

• Update the current Grid Services for the outdoor testbed with the GS package attached below.

• All the services configuration should be the same as before for: cmc, frisbee, inventory, oml2Server, pxe.

• Install (or update if already installed) the OMLv2 server on the machine that will run the 'oml2Server' gridservice. Use the OMLv2 Server package below.

• We now have a new service called 'result' (which allows user to access experiment measurement databases without login to the server hosting that database).

• The 'result' service needs to be activated on the same server that runs the 'oml2Server' service. Indeed, it will look for the databases that OMLv2 server has created on the disk of that machine.

• The 'result' service needs 'sqlite3' and 'libsqlite3-ruby1.8' to be installed on that same server as well ('apt-get install sqlite3 libsqlite3-ruby1.8').

• To configure the 'result' service: configuration file should be '/etc/gridservices2/available/result.yaml.winlab'. This file does not exist in the package at the moment, but there is a 'result.yaml.nicta' which you could use as a template. In fact, you should pretty much be able to use it as is.

• To active the 'result' service: as usual, create symlink '/etc/gridservices2/enabled/result.yaml' pointing to '/etc/gridservices2/available/result.yaml.winlab'

• To test the 'result' service: assuming the server name is 'oml' then use 'wget -O - ​http://oml:5022/result' to get a list of available commands, then call one of these commands with a valid experiment ID.

Step 2: Install new Node Handler.

• Update the current Node Handler for the outdoor console with the NH package attached below

• To configure NH: in '/etc/nodehandler4' create a symlink named 'nodehandler.yaml' to nodehandler.yaml.winlab'

• If necessary, modify nodehandler.yaml.winlab as you would do for other consoles at winlab.

• Nothing special (compared to a normal NH upgrade on other winlab testbed) should be done here. By default with 'nodehandler.yaml.winlab' config file, the NH should use Multicast to communicate with the nodes, which is exactly what we want for this demo.

Step 3: Install new software on each Node

• First load the latest baseline image on a node. You should use a fixed node here to make things easier. We will install all the required software on that fixed node, then we will create an new 'demo' disk image from that node, and use it to install on other nodes (fixed and mobile)

• Update the current Node Agent for the node with the NA package attached below.

• Nothing special (compared to a normal NA upgrade on other winlab testbed) should be done here. By default with 'nodeagent.yaml.winlab' config file, the NA should use Multicast to communicate with the NH, which is exactly what we want for this demo.

• Update the current OTGv2 applications with the OTGv2 package below.

• Install the new Libsigar library from the package below.

• Install the new OMLv2 Client library from the package below.

• No configurations are required for these software (OTGv2, Libsigar, OMLv2 client).

Step 4: Testing

• Copy the attached experiment file