ORBIT WiFi for robots and other devices needing access to DMZ

This WiFi network was setup for devices such as the robots, Hololens, etc. that need access to machines/resources on the ORBIT DMZ network. It is setup with MAC filtering to prevent unnecessary connection by users. Currently there is only 1 AP located in the control room.

Device	MAC Address
Hololens	b4:ae:2b:bf:b1:f2
Raspberry pi on the roomba "razpi"	b8:27:e8:f1:ca:ab
NUC "alfred" on Pioneer robot	00:c2:c6:aa:22:f6

Configuration

Band: 802.11b/g/n on 2.4GHz (channel 1 or 6) 20MHz bandwidth

SSID: ORBIT
Key: 0rb1tw1f1

That's a zero in place of the 'O' and ones in place of 'i'

MAC Address filtering is enabled!!'''

Administration

Connect from anywhere in DMZ such as internal4 to:
(NOTE: will not work through the WiFi itself)

https://ap-orbit-01.orbit-lab.org

Username: admin
Password: the long one

Adding a device

Add the device's wireless MAC address as a user (MAC = username & password)

1. Connect to the admin interface
2. Go to Security in top right
3. Go to Users for Internal Server tab
4. Enter the MAC address as the Username, Password and Retype
5. Set the Type to Employee
6. Click Add