| | 1 | == ORBIT !WiFi for robots and other devices needing access to DMZ == |
| | 2 | |
| | 3 | This !WiFi network was setup for devices such as the robots, hololens, etc. that need access to machines/resources on the ORBIT DMZ network. It is setup with MAC filtering to prevent unnecessary connection by users. Currently there is only 1 AP located in the control room. |
| | 4 | |
| | 5 | === Configuration === |
| | 6 | Band: 802.11b/g/n on 2.4GHz (channel 1 or 6) 20MHz bandwidth |
| | 7 | |
| | 8 | SSID: ORBIT |
| | 9 | \\Key: 0rb1tw1f1 |
| | 10 | That's a zero in place of the 'O' and ones in place of 'i' |
| | 11 | |
| | 12 | \\'''MAC Address filtering is enabled!!!''' |
| | 13 | |
| | 14 | === Administration === |
| | 15 | Connect from anywhere in DMZ such as internal4 to: |
| | 16 | \\(NOTE: will not work through the !WiFi itself) |
| | 17 | |
| | 18 | `https://ap-orbit-01.orbit-lab.org` |
| | 19 | |
| | 20 | Username: admin |
| | 21 | \\Password: ''the long one'' |
| | 22 | |
| | 23 | ==== Adding a device ==== |
| | 24 | Add the device's wireless MAC address as a user (MAC = username & password) |
| | 25 | |
| | 26 | 1. Connect to the admin interface |
| | 27 | 1. Go to `Security` in top right |
| | 28 | 1. Go to `Users for Internal Server` tab |
| | 29 | 1. Enter the MAC address as the `Username`, `Password` and `Retype` |
| | 30 | 1. Set the `Type` to `Employee` |
| | 31 | 1. Click `Add` |
