Changes between Version 1 and Version 2 of Internal/OpenFlow/SandBoxSetup


Ignore:
Timestamp:
Jun 26, 2009, 7:34:51 PM (15 years ago)
Author:
akoshibe
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Internal/OpenFlow/SandBoxSetup

    v1 v2  
    88
    99
    10 == Preliminary port VLAN assignment based on ORBIT Network Infrastructure ==
     10== Preliminary setup based on ORBIT Network Infrastructure ==
    1111As of now (6/26/09), we still have not began work on a controller. Without the controller, the virtual switches are nonfunctional, so we first begin by trying to build Sandbox 9 using static VLANs and legacy firmware.
    1212
    … …  
    2020No IP relay agents are needed for DHCP because these are only required when the dhcp server lives on one vlan, and hosts on another vlan need its service. In the case of this switch, dhcp comes from beyond the firewall, and comes in from the trunk.
    2121
     22== Configuration ==
     23
     24The steps assume you are already logged into privlaged mode
     25 
     26 1. Create and name VLANs
     27 {{{
     28 
     29
     30 
     31 2. Assign ports to VLANs
     32 3. Create trunk ports
     33
     34
     35
     36
    2237== Setup ==
    2338A host is connected to a Control VLAN port (0/7), and the dhcp comes from trunk port 0/48. It will be able to bind to an address from Control, but not from any other VLAN.