wiki:Internal/OpenFlow/HostSetup

Version 43 (modified by akoshibe, 14 years ago) ( diff )

return to OpenFlow index

Setting up NetFPGA hosts: Ubuntu 10.04

Current Ubuntu NetFPGAs run Ubuntu version 8.04 and OpenFlow ver. 1.0. Here we try to move to newer distributions w/ OpenFlow Ver. 1.0. The hardware we use here is the NetFPGA cube, another version of the NetFPGA pre-built solution. As per the !OpenFlow portion of the setup, a user named 'openflow' with root privs was added for this purpose.

Setup of the NetFPGA using earlier distributions can be found in the Diaries.

Linux distro:
Ubuntu Server 10.04, w/ xfce4 WM, openssh-server
kernel: 2.6.32-21-generic-pae

Packages:
NetFPGA base 2.1.0
Tunneling OpenFlow NetFPGA 1.0.0

Installing Ubuntu.

  1. set boot priority of CD drive to 1st in BIOS
  2. If desktop edition, boot as a live CD and install from there. Trying direct install just results in the system proceeding to live CD Mode (10.04). Server edition can be installed directly w/out issues.

I: Setup - NetFPGA drivers.

1. dependencies.

There is an updated dependency list:

  • ncurses-dev
  • libnet1-dev
  • libxml-simple-perl
  • libio-interface-perl
  • liblist-moreutils-perl
  • liberror-perl
  • libnet-rawip-perl
  • sun-java6-jre
  • sun-java6-jdk
  • libpcap0.8-dev

Installing java packages. In 10.04, sun-java6-jre, jdk are obsoleted and moved to the partner repository. This repository can be added w/ the following (ref: https://help.ubuntu.com/community/Repositories/CommandLine):

  1. copy "deb http://archive.canonical.com/ lucid partner" sans quotes to /etc/apt/sources.list
  2. run apt-get update.
  3. run apt-get as usual for the packages.

2. Kernel memory allocation.

Ubuntu versions beyond 8.04 (assume anything w/ kernels beyond v 2.6.28) use GRUB 2. GRUB 2 gets rid of menu.lst, so kernel memory must be allocated via the following method (ref. http://ohioloco.ubuntuforums.org/showthread.php?p=8229620):

Add "vmalloc=512m" to GRUB_CMDLINE_LINUX_DEFAULT in /etc/default/grub so it looks like this:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash vmalloc=512m"

Then run update-grub to regenerate /boot/grub/grub.cfg with the new parameter (you never want to modify grub.cfg directly).

3. Symlinks.

Download libpcap.so.0.9.4, found below. Move it into /usr/lib. Run ubuntu_setup.sh (also attached below), or manually create the following links:

ln /usr/bin/lspci /sbin/lspci
ln /usr/bin/setpci /sbin/setpci
ln -s /usr/lib/libpcap.so.0.9.4 /usr/lib/libpcap.so.0.9 
ln -s /usr/lib/libpcap.so.0.9.4 /usr/lib/libpcap.so.0
ln -s /usr/lib/libpcap.so.0.9.4 /usr/lib/libpcap.so

4. Edit files.

  • edit "usleep 250" to "sleep 0.00025" in /test_loopback_drop/run.pl
  • edit /home/netfpga/NF2/projects/router_kit/sw/rkd.cc to include limits.h

NOTE: this edit is no longer required for version 2.1.1 of the package.

5. Setting Variables.

After setting NF_ROOT to the netfpga directory, source nf_profile, located in ${NF_ROOT}/bin/

export NF_ROOT=/home/openflow/netfpga  #(wherever your netfpga base files are) 
source ${NF_ROOT}/bin/nf_profile

6. Moment of truth.

make then make install.
Then, check for nf2 module with lsmod | grep nf2:

nf2                    13425  0 

and for nf2cn, n=0:3 with ifconfig -a.

nf2c0     Link encap:Ethernet  HWaddr 00:4e:46:32:43:00  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:16 

nf2c1     Link encap:Ethernet  HWaddr 00:4e:46:32:43:01  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:16 

nf2c2     Link encap:Ethernet  HWaddr 00:4e:46:32:43:02  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:16 

nf2c3     Link encap:Ethernet  HWaddr 00:4e:46:32:43:03  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:16 

7. add the cpci reprogrammer to startup routine

Add the following to /etc/rc.local:

/home/openflow/netfpga/lib/scripts/cpci_reprogram/cpci_reprogram.pl --all

The selftest does not work in Ubuntu. so don't try it.

II: Setup - OpenFlow components.

The OpenFlow wiki on CentOS NetFPGA setup were followed in conjunction with the netfpga site wiki for the Tunneling OpenFlow NetFPGA. Stes are reiterated here since nothing is permanent.

1. dependencies.

  • autoconf
  • libtool
  • pkg-config
  • linux-source-2.6.32
  • git-core
  • automake
  • m4

2. OpenFlow package installation

This happens in the same directory as the netfpga install. From git repository (automatically pulls the newest version):

git clone git://openflowswitch.org/openflow.git
cd openflow
./boot.sh

To make NetFPGA compatible:

./configure --enable-hw-lib=nf2

Remove avahi-daemon and disable IPv6:

sudo apt-get remove avahi-daemon

in /etc/sysctl.conf add

net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1

and in /etc/modprobe.d/blacklist.conf

blacklist net-pf-10
blacklist ipv6

3. NetFPGA tunnel package

Download and untar in /home/openflow/. Move tunneling_openflow_switch.bit and reg_defines_tunneling_openflow_switch.h to your_openflow_directory/hw-lib/nf2/. The files should be located under bitfiles/ and /projects/tunneling_openflow_switch/lib/C/ in the netfpga directory, respectively. Do a make and make install in the openflow directory.

4. Regression test

The setup should be wired as such

 eth1 <----> nf2c0 
 eth2 <----> nf2c1 

The test can be run with the following command:

nf_regress_test.pl --project tunneling_openflow_switch

As of now, getting this error:

root@node1-2:~/netfpga/lib/scripts/cpci_reprogram# /home/akoshibe/netfpga/bin/n_regress_test.pl --project tunneling_openflow_switch

NetFPGA environment:
  Root dir:       /home/openflow/netfpga
  Project name:   tunneling_openflow_switch
  Project dir:    /home/openflow/netfpga/projects/tunneling_openflow_switch
  Work dir:       /tmp/root

Root directory is /home/openflow/netfpga
Running tests on project 'tunneling_openflow_switch'...
  Running global setup... FAIL
Output was:

NetFPGA environment:
  Root dir:       /home/openflow/netfpga
  Project name:   tunneling_openflow_switch
  Project dir:    /home/openflow/netfpga/projects/tunneling_openflow_switch
  Work dir:       /tmp/root

Found net device: nf2c0
Error: Virtex design compiled against a different CPCI version
  Active CPCI version : 4 (rev 1)
  Device built against: 3 (rev 4)
Bit file built from: nf2_top_par.ncd
Part: 2vp50ff1152
Date: 2010/ 5/ 4
Time: 15:49:32
Error Registers: 0
Good, after resetting programming interface the FIFO is empty
Download completed -  2377668 bytes. (expected -1).
DONE went high - chip has been successfully programmed.
CPCI Information
----------------
Version: 4 (rev 1)

Device (Virtex) Information
---------------------------
Project directory: tunneling_openflow_switch
Project name: Tunneling OpenFlow Switch
Project description: Tunneling OpenFlow Switch

Device ID: 0
Version: 0.1.0
Built against CPCI version: 3 (rev 4)

Download Failed: 256


global/setup exited with value 1

bitfile issues

cpci_reprogram utilizes bitfiles located in /usr/local/netfpga/bitfiles. this is due to the hard-coded path in the cpci Perl scripts. The bitfile versions must match between all cpci.bit and any project bitfiles involved, or else it will throw the above errors. The bitfiles attached should all work - Download the tarball and extract in /usr/local/netfpga/bitfiles.




return to OpenFlow index

Attachments (3)

Download all attachments as: .zip

Note: See TracWiki for help on using the wiki.