Software Notes

• Control Files
  • Murium Wins Src
  • Src:
    • ​commands.c: includes the commands.h header file which is located right below it on the list of files. These are a bunch of hook definitions. The first few seem to be user defined code. *There is one that is incomplete: DR_GetStatus. *The two functions below that (Clear feature and set feature) are simply defined as return true, this could be a problem, i'm guessing the function definition should be more than just that. *DR_VendorCmnd: what is the array SetUpDat and where is it defined? What is being stored in it becuase the only things mentioned in the comments are only relevent for SetUpDat[2 and 3]. The function is a switch structure based off of the value in SETUPDAT[1]
    • ​commands.h: defines all the variables that are used in commands.c but none of the functions are prototyped here. Do they need to be prototyped? no files are included
    • ​eeprom_init.c: includes usrp_commons.h, usrp_commands.h, and spi.h
      • write_byte_msb takes in unsigned char v and circular shifts it 8 times each time outputting the msb
      • eeprom_init configures the IO ports
    • ​eeprom_io.c: includes eeprom_io.h, i2c.h, delay.h. and has a read and write function defined within it
    • ​eeprom_io.h: prototypes the two functions used in eeprom_io.c
    • ​error_no.h: defines a lot of errors
    • ​fpga.c: includes noisegen_regs.h, error_no.h, fpga.h
      • possible typo: ConfigSatate
      • fpga_done only has a return true definition, perhaps more code is required
    • ​fpga.h: defines the states of the xilinx state machine. prototypes the functions used in fpga.c
    • ​fpga_specific.c: include fpga_specific.h
      • return types are all false on these functions
      • functions to read and write various configuration bits and send rf data
    • ​fpga_specific.h: defines the ports used but doesn't prototype the functions used in fpga_specific.c
    • ​gpif.c: configures the general purpose interface for fx2, most of code has do not edit warnings
      • gpifinit function is added after a line that says "you may add additional code below"
      • all the do not edit sections have been commented out
    • ​init_gpif.c: include usrp_common.h
      • some very strange comments in this file, not sure if they are alerting to current problems or ones that were already addressed previously
    • ​led.c: includes fx2regs.h, noisegen_regs.h, led.h
      • all functions (except for the switch) return 0
      • not entirely sure what the switch structure is trying to accomplish, nor what the error blink fnc above it is doing
    • ​led.h: defines the cases for the switch and also all the functions used in led.c
  • Yuriy Loses and gets Lib
  • Lib: Missing Delay.h, fx2regs.h, fx2utils.h, syncdelay.h
    • ​delay.c: Contains Microsecond and Millisecond delays, 1 Bus Cycle = 4 Clock Cycles, mdelay function is not accurate, must be tuned
    • ​fx2utils.c: USB functionality, delay tuned
    • ​i2c-compiler-bug.c: Identical to i2c.c except for commented line
    • ​i2c.c: Seems complete, no fixes commented
    • ​isr.c: Seems complete, no fixes commented, has sv,uv, and fgv hooks
    • ​timer.c: Called at 100Hz, resets RCAP2?, calls hook sv, no fixes commented
    • ​usb_common.c: Needs changes and clarification, usb alt settings for interface may need changing

• Firmware Files

• Driver Files
  • Murium Gets Linux
  • Yuriy Gets Windows
  • Windows
    • ​boardcommands.h: Defines commands that allow the user to adjust the operation of the device
    • ​cyapi.h: Standard file, defines an api to interface with a cypress usb device
    • ​mainform.h: Interface to noisegen program, requires additions to constructor code although form seems completely drawn
    • ​noiseboard.cpp: Code to manage board behavior, update fpga
    • ​noisegenerator.cpp: Top-level, launches mainform to start program
    • ​registerformentry.h: Not sure what this is, may need to change the way register coordinates are calculated
    • Other files in this directory are either auto-generated by Visual C++ or merely include/define things for other files