| Version 11 (modified by , 17 years ago) ( diff ) |
|---|
List of Node Failures
| Node | Failure Mode | Solution / Notes |
| [1,5] | Pxe Halt - Locks up during execution of PXE code | Multiple resets (more than 1) may be required Might require node Change |
| [1,5] | Dead Node ID box top LED (the blinking one) | Power cycle Fixed it Rabbit Issue? |
| [3,8] | First Power on Halt | Locks during the first attempt Post after reset |
| [17,4] | First Power on Halt | Locks during the first attempt no serial console output |
| [1,14] | First Power on Halt | Locks during the first attempt Reset Fixes it has new disk |
| [20,19] | Disk Failure | Kernel Throws errors during imageing Disk Changed |
| [12,9] | Disk Controller Failure | Disk controller was having issues, disks were being incorrectly recognised |
| [3,18] | Disk Failure | Disk Write errors Disk replaced |
| [5,11] | Disk Failure | Disk Write errors Disk replaced |
| [14,11] | Disk Failure | Disk Write errors Disk replaced |
| [13,5] | Lock Up | Rabbit and Node were halted Power cycled |
| [4,11] | Disk Failure | Disk Write errors Disk replaced |
| [5,9] | Disk Failure | Disk Write errors Disk replaced |
| [9,11] | Disk Failure | Disk Write errors Disk replaced |
| [3,19] | Bad Node | Mother board Failure, refused to boot Replaced |
Note:
See TracWiki
for help on using the wiki.
