Changes between Version 25 and Version 26 of Internal/ImageInstall

Timestamp:

Sep 6, 2007, 9:23:45 PM (17 years ago)

Author:

ssugrim

Comment:

—

Internal/ImageInstall

@@ -129 +129 @@
 Start the service first, start the client second. Assming that it worked you should see a progress indicator.  
  
-====
+----
 
 Additional notes
@@ -135 +135 @@
  * you can specify a multicast address in the -m tag, for doing multiple nodes. E.G. 224.0.0.10 
  * when starting frisbeed on repository2 make sure to tell it which interface to listen on (via the -i ''ipaddress'' parameter, other wise the  client will get confused about an address mismatch.
- * if you were imageing a console (and thus using one of the console images), once the system has booted into the image you need to make 2 post image changes
- 1. In /etc/udev/rules.d/ remove the z25_persisten_net.rules files. If not removed they will screw up the numbering of the interfaces
- 1. change the hostname. 
+ * if you were imageing a console (and thus using one of the console images), once the system has booted into the image you need to make 2 post image changes and then reboot
+  1. In /etc/udev/rules.d/ remove the z25_persisten_net.rules files. If not removed they will screw up the numbering of the interfaces
+  1. change the hostname.