Changes between Version 33 and Version 34 of Hardware/jCM/dCM3


Ignore:
Timestamp:
Dec 16, 2011, 9:11:01 PM (13 years ago)
Author:
Ilya Chigirev
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Hardware/jCM/dCM3

    v33 v34  
    1717The entire CM3 will is small enough to be mounted inside the case of the Orbit nodes and is powered off of the 5V standby voltage from the node power supply. The CM is also able to communicate through serial in either crossover or straight cable settings by configuring jumpers, and through a standard DB9 connector or a 5x2 0.1" spaced header.
    1818
    19 Pages:
    20 [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/00-DevelopmentEnvironment Development Enviroment]
    21 [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/01-HardwareDescription Hardware]
    22 [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/02-SoftwareDescription Software]
    23 [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/03-Usage#InstallingtheCM3 Installation]
    24 [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/03-Usage#UsingtheCM3 Usage]
    25 [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/04-Reimage Firmware Update]
     19Pages:[[BR]]
     20 * [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/00-DevelopmentEnvironment Development Environment]
     21 * [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/01-HardwareDescription Hardware]
     22 * [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/02-SoftwareDescription Software]
     23 * [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/03-Usage#InstallingtheCM3 Installation]
     24 * [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/03-Usage#UsingtheCM3 Usage]
     25 * [http://www.orbit-lab.org/wiki/Hardware/cCM/cCM3/04-Reimage Firmware Update]
    2626
    2727