Changes between Version 18 and Version 19 of Hardware/jCM/dCM3/cSoftware


Ignore:
Timestamp:
Dec 16, 2011, 9:25:43 PM (13 years ago)
Author:
Ilya Chigirev
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Hardware/jCM/dCM3/cSoftware

    v18 v19  
    5353Re-flashing as CM over the serial port should be done when the node is not accessible aver the network, it is a generally slower method than via FTP. Before you can recover the firmware over serial you will need to install Device Installer on your PC. Device Installer is free to download off the lantronix website, and can be found [http://ltxfaq.custhelp.com/app/answers/detail/a_id/644 here].
    5454
    55  1. Open DeviceInstaller
     55 1. Open 'DeviceInstaller'
    5656 2. Go to 'Tools'->'Advanced'->'Recover Firmware' (or simply the F8 key)
    5757 3. Configure the options, and hit OK to load the image