Changes between Version 16 and Version 17 of Hardware/jCM/cCM2


Ignore:
Timestamp:
Jan 11, 2013, 1:24:22 AM (12 years ago)
Author:
Ilya Chigirev
Comment:

—

Legend:

Unmodified
Added
Removed
Modified

  • Hardware/jCM/cCM2

    v16 v17  
    1 == Version 2 (CM2) ==
     1=== Version 2 (CM2) ===
    22
    3 [[TOC(Hardware/CM/*, depth=2 )]]
    4 
    5 === Introduction ===
     3[[TOC(Hardware/jCM*, depth=5 )]]
    64
    75The ORBIT Chassis Manager 2 (CM2) is a simple subsystem for automatic and manually driven node hardware management such as local or
    86remote system resets, power on/off operations and remote serial console access as well as monitoring the status of node (such as system temperatures, voltages, fans, power supplies, bus errors, system physical security, etc.).
    97
    10 CM2 is similar to its [wiki:Hardware/cCM/aCM1 predecessor], but has a more capable microcontroller, additional nodal wireless interface support, better software portability, wide area wireless control channel support, and location awareness.   
     8CM2 is similar to its [wiki:Hardware/jCM/bCM1 predecessor], but has a more capable microcontroller, additional nodal wireless interface support, better software portability, wide area wireless control channel support, and location awareness.   
    119
    12 Development environment is on sanbox3 console and consists of several components
     10Development environment is on SB3 console and consists of several components.
     11
     12This version of the CM is no longer used, however the [wiki:Hardware/jCM/cCM2/aHardware hardware], [wiki:Hardware/jCM/cCM2/bDev development], and [wiki:Hardware/jCM/cCM2/cSoftware software] descriptions are provided.