Changes between Version 10 and Version 11 of Hardware/hNodes/cNodeVer3/dAssembly/cBios/abLV67K

Timestamp:

Jun 19, 2013, 1:14:26 AM (11 years ago)

Author:

msherman

Comment:

—

Hardware/hNodes/cNodeVer3/dAssembly/cBios/abLV67K

@@ -8 +8 @@
 ----
 
-urls used 
-http://www.asrock.com/support/Download/MacTool.asp
-http://www.paoloiannelli.com/tag/flashdisable/
 
-Set bios to default settings, then:
-* tab 1
- * boot features
+== Bios Setup ==
+* Go to tab Exit
+ * Load Default settings
+ * Then enable the following options
+* Main
+ * Boot Features
   * enable quickboot
   * enable console redirection
    * ensure rate is 115200
-* advanced
+* Advanced
  * network config
   * enable lan oprom
-* others
+* Others
  * hardware monitor
   * warning temp = 80c
@@ -27 +27 @@
    * temp = 40c
    * threshold = 5c
-* boot (use + and - to move items, arrow keys to navigate. shift+1 toggles enabled state)
+* Boot (use + and - to move items, arrow keys to navigate. shift+1 toggles enabled state)
  1. usb hdd
  2. pci LAN (will not show both NICs until reboot after lan oprom enabled)
@@ -34 +34 @@
  5. move all others below these, and disable with shift+1
 
+== Troubleshooting ==
+* Step 1 is to reset bios to default settings and reset options as above.
+* If this fails, remove power from the motherboard, move the cmos jumper to position 2, wait at least 30 seconds, and then move it back. Then reset bios options as above.
+* If bios is corrupted, reflash according to directions at [http://www.commell.com.tw/Support/Product%20Technical%20Support/LV-67K.htm]
+* When flashing bios, be sure to use -savemac option.
+* If mac is lost, MACtool below can be used.
+
+urls used 
+
+[http://www.asrock.com/support/Download/MacTool.asp]
+
+[http://www.paoloiannelli.com/tag/flashdisable/]